Rocker Arm & Shaft Pkg. BBM 1.5:1 orig Heads

Rocker Arm & Shaft Pkg. BBM 1.5:1 orig Heads
€1,021.04 *
Content: 1 Piece

Prices incl. VAT plus shipping costs

2-8 Weeks if in stock at Manufacture

  • Hughes Engines
  • HUG-15103
Questions about the article? Write us!
Kipphebelsatz Big Block Mopar Ausreichend für milde hydraulische Nockenwellen. Solltet... more

Product information

"Rocker Arm & Shaft Pkg. BBM 1.5:1 orig Heads"
Kipphebelsatz
Big Block Mopar
Ausreichend für milde hydraulische Nockenwellen.
Solltet ihr einen wilderen Motor bauen, fragt uns, wir suchen dann was passendes haltbares raus.

CNC'd Aluminum Rockers. Includes Spacers, Shims & chamfered Shafts.
We designed these rockers for Chrysler engines specifically. They are not something that was ″ close and changed slightly to fit. They were not just ″ good enough for Dodges″ , as others are. We have developed our rockers after years of putting up with other rockers and their various shortcomings. They are made in the USA, exclusively for Hughes Engines. There are several important features that distinguish our premium rockers from the garden-variety rocker you find from everyone else.

These rockers have the standard pushrod off/set and will work in all positions requiring standard off/sets. Such as, O.E.M. Iron, Edelbrock RPM & E-Street, 440 Source Stealth, INDY SR, EZ, EZ-1, Little EZ and on the exhaust position of Edelbrock Victor, INDY 440-1, 440-C, Big EZ, Mopar O.E.M. and Pro-Comp.

These rockers are CNC machined. This means that once the correct dimensions are determined and programmed in, all parts are identical.
Our rockers have a revised oil system that gives a positive oil flow to the pushrod cup at all angles.
Our rollers and axle shafts are larger (i.e. stronger) and reduce rolling friction
They do not use needle rollers on the shaft. Mopars® have a full pressure oil supply to the rocker and shaft interface area, and do not need the rollers. On the other hand, stud mounted rockers are not positively lubricated with pressurized oil and must have rollers to live. Magnum rockers are not pressure lubricated and will require rollers on the shaft. Yes, just like the Chevy's!
Our big block rockers will clear 1.625″ diameter valve springs without cutting or grinding. (When the geometry is correct)
We do not anodize the rockers for a reason. If anodizing material is left in the bore, the wear surface is compromised when in contact with the hardened rocker shaft. Honing out anodized material is a machining operation that would add cost and leaves a finish no better than a straight bored finish.
We tumble finish our rockers which is not as flashy as the ″ pretty ones″ like the ″ tuner guys″ on TV. The appearance is more compatible with those you would see on Pro-stock and NASCAR engines. That's good enough for us.
The roller position and rocker design are unique features. The rollers travel in the center of the valve stem tip and the path is narrower than other ″ will fit″ rockers. Most other rocker arms do not properly position the roller on the valve tip.
Our rocker kits come with our popular, modified oiling shafts, spacers and shims. Properly assembled and shimmed, each pair of rocker will have less than 0.015″ total side clearance. This provides exceptional oil control and a valve train that is much quieter than all other systems.
For those customers requiring severe duty rockers, we can supply these rockers cryogenically treated. This process will increase the strength and durability of the rockers 2 to 3 times. For additional information about cryogenic treatment refer to our tech article.
Kits come shipped with complete, detailed installation instructions.
Compatible with hydraulic, mechanical, or roller camshafts.
Machined to clear larger diameter valve springs.
Cylinder Head BBM Aluminium, Chamber vol 84cc, angeled Plugs Cylinder Head BBM Aluminium, Chamber vol 84cc, angeled Plugs
Order number: MsPro-09-CYH-10A
Content: 1 Pair
€1,884.96 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

500cui Mopar Big Block stroker Motor komplett 500cui Mopar Big Block stroker Motor komplett
Order number: MsPro-09-BBM-02
Offer on request
318cui Poly small Block Motor 318cui Poly small Block Motor
Order number: SW10012
Offer on request
440cui Motor komplett 440cui Motor komplett
Order number: SW10011
Offer on request
Intake Gasket BBM Valley Pan 413, 426w, 440cui blocked Intake Gasket BBM Valley Pan 413, 426w, 440cui blocked
Order number: SFL1215
Content: 1 Set(s)
€39.91 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

Pushrods Ball/Ball 6.900″, 5/16 in. Chromoly, Heat-Treated Universal Pushrods Ball/Ball 6.900″, 5/16 in. Chromoly, Heat-Treated...
Order number: CCA-7631-16
Content: 1 Set(s)
€165.96 *

5-13 days if in stock at Manufacture

Pushrod Length Checker 8.5-9.8 in. Ball/Ball Pushrod Length Checker 8.5-9.8 in. Ball/Ball
Order number: CCA-7902-1
Content: 1 Piece
€21.21 *

5-13 days if in stock at Manufacture

Light Gray Chrysler Corporation Stamping on the Dash VIN Plate Light Gray Chrysler Corporation Stamping on the Dash VIN Plate
Order number: CCT10
€44.55 *

2-4 Weeks if in stock at Manufacture

Valve Spring Locators,Inside, Steel,.060″ thick, set of 16 Valve Spring Locators,Inside, Steel,.060″ thick, set of 16
Order number: CCA-4782-16
Content: 1 Set(s)
€58.60 *

5-13 days if in stock at Manufacture

Valve Spring Locators,Inside, Steel,.060″ thick, set of 16 Valve Spring Locators,Inside, Steel,.060″ thick, set of 16
Order number: CCA-4780-16
Content: 1 Set(s)
€58.60 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

Lifter BBM & SBM Hydraulic, High Performance Lifter BBM & SBM Hydraulic, High Performance
Order number: HUG-5003
Content: 1 Piece
€15.33 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

Lifter BBM & SBM Hydraulic Flat Tappet MOPAR Quiet Power Lifter BBM & SBM Hydraulic Flat Tappet MOPAR Quiet Power
Order number: ISK-3912-HY
Content: 1 Set(s)
€484.52 *

5-13 days if in stock at Manufacture

Perma Shield Sealant, Intake Gasket Sealant, fuel resistand Perma Shield Sealant, Intake Gasket Sealant, fuel resistand
Order number: PER-85420
Content: 0.06 Liter (€254.33 * / 1 Liter)
€15.26 *

8-10 weeks if in stock at Manufacture

Fuel Pump Pushrod BBM Hi Quality Fuel Pump Pushrod BBM Hi Quality
Order number: HRS-92152
Content: 1 Piece
€50.49 *

5-13 days if in stock at Manufacture

VIN Transfer & Rivet SET NOS 68-74 all vehicles VIN Transfer & Rivet SET NOS 68-74 all vehicles
Order number: CCT10S
€102.49 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

VIN Rivets NOS 68-74 all vehicles VIN Rivets NOS 68-74 all vehicles
Order number: CCT10R
€56.08 *

2-4 Weeks if in stock at Manufacture

Bolt Kit, Trans Oil Pan Steel Bolt Kit, Trans Oil Pan Steel
Order number: MPSP-21Blech
€24.99 *

2-3 weeks

Oil Pick Up BBM 3/8″ for 5″ - 5 1/4″ sump Oil Pick Up BBM 3/8″ for 5″ - 5 1/4″ sump
Order number: SUM-G3508
Content: 1 Piece
€37.81 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

Rocker Arm BBM 1.5:1 single Rocker right offset Rocker Arm BBM 1.5:1 single Rocker right offset
Order number: CCA-1621R-1
Content: 1 Piece
€50.30 *

5-13 days if in stock at Manufacture

Special offer
Cylinder Head BBM Stage VI, Max Wedge Intake Port, Aluminium, 78cc Chamber Cylinder Head BBM Stage VI, Max Wedge Intake Port, Aluminium,...
Order number: DCC-5249579NLA
Content: 1 Piece
€1,111.00 * €1,787.71 *
Water Neck Big & Small Block cast Aluminium, Chrome Water Neck Big & Small Block cast Aluminium, Chrome
Order number: MIL-65730
Content: 1 Piece
€37.58 *

5-13 days if in stock at Manufacture

Spark Plug Wire Set - BBM 8,5mm Firecore 50 Black, Mopar Style female Dist. Spark Plug Wire Set - BBM 8,5mm Firecore 50 Black, Mopar Style...
Order number: PF-1002
Content: 1 Set(s)
€217.94 *

2-4 Weeks if in stock at Manufacture

Windage Tray BBM till 3,750″ stroke with integrated Rubber Oil Pan Gasket Windage Tray BBM till 3,750″ stroke with integrated Rubber Oil...
Order number: SUM-G2339
Content: 1 Piece
€80.10 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

Bolt Kit Exhaust Manifold Flange Bolt Kit Exhaust Manifold Flange
Order number: MOP-1000028A
Content: 1 Set(s)
€26.69 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

Governor 5800rpm shift weights Governor 5800rpm shift weights
Order number: AAA-22204-58
Content: 1 Piece
€112.07 *

1-3 Weeks if in stock at Manufacture

Engine Mopar 400 Base to 500cui Stroker 600HP Mod Man Intake Engine Mopar 400 Base to 500cui Stroker 600HP Mod Man Intake
Order number: IND-400-C6-500-600
Content: 1 Piece
€17,056.15 *

4-6 Weeks if in stock at Manufacture

High Temperature Thread Sealant High Temperature Thread Sealant
Order number: PER-59235
Content: 0.05 Liter (€376.80 * / 1 Liter)
€18.84 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

Rocker Arm & Shaft Pkg. BBM 1.6:1 Rocker Arm & Shaft Pkg. BBM 1.6:1
Order number: CRN-64791-1
Content: 1 Set(s)
€920.77 *

5-13 days if in stock at Manufacture

Intake Gasket BBM Paper 4 Pice Set Intake Gasket BBM Paper 4 Pice Set
Order number: RMS90175
Content: 1 Pair
€24.22 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

Silicone High Temperature Sealant Silicone High Temperature Sealant
Order number: HOB-1216676
Content: 0.31 Liter (€48.32 * / 1 Liter)
€14.98 *

2-4 weeks

Oil Filler Cap, Mopar Oil Filler Cap, Mopar
Order number: AMD-337-1070
Content: 1 Piece
€25.75 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

Valve Spring Shims, Steel, Hardened, 1.500 in. Outside Diameter, .015 in. Thick, Set of 16 Valve Spring Shims, Steel, Hardened, 1.500 in. Outside...
Order number: CCA-4739-16
Content: 1 Set(s)
€11.35 *

5-13 days if in stock at Manufacture

Exhaust Manifold Fastener Sleeve Nut, long, BBM Exhaust Manifold Fastener Sleeve Nut, long, BBM
Order number: MOP-OMK
Content: 1 Piece
€10.95 *

3-6 Weeks if in stock at Manufacturef

Exhaust Manifold Fastener Sleeve Nut, short, BBM Exhaust Manifold Fastener Sleeve Nut, short, BBM
Order number: MOP-OMW
Content: 1 Piece
€10.95 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

Oil Pan BBM, 5.25″ Deep Sump, Hemi Style, 6 Quart Oil Pan BBM, 5.25″ Deep Sump, Hemi Style, 6 Quart
Order number: SUM-G3511
Content: 1 Piece
€159.94 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

Governor 5600rpm shift weights Governor 5600rpm shift weights
Order number: AAA-22204-56
Content: 1 Piece
€124.53 *

1-3 Weeks if in stock at Manufacture

Head Gasket BBM 4.380″ bore 0.040″ thick Head Gasket BBM 4.380″ bore 0.040″ thick
Order number: CGT-C5461-040
Content: 1 Piece
€157.79 *

5-13 days if in stock at Manufacture

Oil Pick Up BBM 3/8″ for 5″ - 5 1/4″ sump Oil Pick Up BBM 3/8″ for 5″ - 5 1/4″ sump
Order number: VVN-121-1055
Content: 1 Piece
€39.17 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

Oil Pan BBM, 5.25″ Deep Sump, Hemi Style, 6 Quart Oil Pan BBM, 5.25″ Deep Sump, Hemi Style, 6 Quart
Order number: MIL-30761
Content: 1 Piece
€331.36 *

5-13 days if in stock at Manufacture

Oil Filter Mopar SBM & BBM Standard long Oil Filter Mopar SBM & BBM Standard long
Order number: WIX-51515
Content: 1 Piece
€16.65 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

Viewed

The Stallion among
the Pony Cars!

There is no other Mopar for which more parts are available
We have them all!