Nockenwelle, 270 H, Magnum, für Hydrostößel, Timing 270/270-224/224-.470/.470-110, Big Block Mopar 361, 383, 400, 413, 426wedge, 440 cui, einzeln Camshaft, 270H, Magnum, Hydraulic Flat Tappet, 270/270-224/224-.470/.470-110 The cam for your street/strip car. Designed for hot street/strip cars, these Comp Cams Magnum series cams require a higher compression ratio, rear-end gear ratio, and stall torque converter than stock. With a very aggressive profile, these camshafts provide maximum top-end performancefor your high performance car. Brand: COMP Cams Product Line: COMP Cams Magnum Hydraulic Camshafts Part Type: Camshafts Cam Style: Hydraulic flat tappet Basic Operating RPM Range: 1,800-5,500 Intake Duration at 050 inch Lift: 224 Exhaust Duration at 050 inch Lift: 224 Duration at 050 inch Lift: 224 int./224 exh. Advertised Intake Duration: 270 Advertised Exhaust Duration: 270 Advertised Duration: 270 int./270 exh. Intake Valve Lift with Factory Rocker Arm Ratio: 0.470 in. Exhaust Valve Lift withFactory Rocker Arm Ratio: 0.470 in. Valve Lift with Factory Rocker Arm Ratio: 0.470 int./0.470 exh. Lobe Separation (degrees): 110 Camshaft Gear Attachment: 1-bolt Computer-Controlled Compatible: No Grind Number: CRB 270H-10 Valve Springs Required: Yes Quantity: Sold individually. Notes: Single-bolt camshaft. Camshaft, 1-Bolt, Hydraulic Flat Tappet, Advertised Duration 270/270, Lift .470/.470, Mopar, Big Block, Each Give your high performance engine the camshaft it deserves. Designed for hot street/strip cars, these COMP Cams Magnum series cams require a higher compression ratio, rear-end gear ratio, and stall torque converter than stock. With a very aggressive profile, these camshafts provide maximum top-end performance for your high performance car.