Headers B-/E-Body SBM 1-3/4″ Step Version for W2 Heads ceramic coated out- & inside

Headers B-/E-Body SBM 1-3/4″ Step Version for W2 Heads ceramic coated out- & inside
€1,122.28 *
Content: 1 Pair

Prices incl. VAT plus shipping costs

2-4 Weeks if in stock at Manufacture

  • TTi Performance Exhaust and Headers
  • TTI340BEW2-C4
Questions about the article? Write us!
62-74 B-Body 70-74 E-Body 1 5/8″ primary tubes into 1 3/4″ Secondary tubes with 3″ collectors... more

Product information

"Headers B-/E-Body SBM 1-3/4″ Step Version for W2 Heads ceramic coated out- & inside"
62-74 B-Body
70-74 E-Body
1 5/8″ primary tubes into 1 3/4″ Secondary tubes with 3″ collectors
Ceramic Coated with Thermal Barrier

Header Finish

C0 - Raw (Bare Mild Steel
C1 - Nickel Chrome Plated
C4 - Ceramic Coated with a Thermal Barrier
C5 - Polished Ceramic Coated with a Thermal Barrier



Bei Bestellung benötigen wir die folgenden Daten:

• Welcher Motor ist verbaut?
• Welches Getriebe, AT oder MT, ist verbaut?
• Wenn M/T dann ist der Durchmesser des Flywheel (9“, 10,5“ oder 11“) erforderlich
• Baujahr, Marke, Modell
• Deck Height: B/RB & Gen2?
• Zylinderkopf Marke und Modell
• Getriebe: A/T oder M/T
• Gen3 Hemi, auf welcher Seite ist der Anlasser? Auf der Fahrerseite oder auf der Beifahrerseite
• Bei Bestellung von Fächerkrümmern ist die Rohrgröße erforderlich: 2.5”, 3.0“, 3.5” oder 4.0”

• Genaue Infos bezüglich Passungsproblemen bitte vor dem Kauf hier nachlesen, bei Fragen stehen wir natürlich gerne zur Verfügung!
• http://www.ttiexhaust.com/Category-ClassicHeaders/440-178/TTi440-178.htm



• We need following data by order:

• casting-nr. (7-digit) from mainfold
• which engine
• which transmission, AT or MT
• If Standard Trans, Flywheel size required: 9“, 10,5“ or 11”
• construction year, make, model
• Suspension: Stock (with torsion bars) or Coilover (no torsion bars)
• If Coilover, make and model required
• Cylinder head make and model
• Deck Height (B/RB &Gen2 Hemis): Low-port or Raised-port
• Gen3 Hemis, what side is starter on? Drivers-side or Passenger-side
• When ordering Headers, the exhaust system tube size is required: 2.5”, 3.0”
3.5” or 4.0” (This is required for us to supply the correct size header adapter / reducers to transition the headers to the exhaust system)

Year: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974
Header Finish: Ceramic Coated with a Thermal Barrier
Make: DODGE, PLYMOUTH
Fahrzeug Model: BARRACUDA, BELVEDERE, CHALLENGER, CHARGER, CORONET, DART, GTX, POLARA, ROADRUNNER, SATELLITE, SAVOY
Body: B-Body, E-Body
Engine Family: Mopar small block LA, Mopar small block Magnum
Engine Size: 5.6L/340, 5.9L/360
Produktgruppe: Headers
Pack size: 1230 × 460 × 310 mm
Weight: 42 kg
Tail Light Lenses 72 Road Runner / GTX Tail Light Lenses 72 Road Runner / GTX
Order number: MOP-133-72
Content: 1 Set(s)
€680.66 *

2-4 Weeks if in stock at Manufacture

Carpet Set E-body 70-74 A/T Green Carpet Set E-body 70-74 A/T Green
Order number: OAM-53658-509
Content: 1 Piece
€278.42 *

5-13 days if in stock at Manufacture

Carburetor 650cfm Double Pumper Shiny Carburetor 650cfm Double Pumper Shiny
Order number: HLY-0-4777S
Content: 1 Piece
€921.55 *

5-13 days if in stock at Manufacture

Rod Bearings BBM 0.030 ″ Undersize Rod Bearings BBM 0.030 ″ Undersize
Order number: CLE-CB527P30
Content: 1 Piece
€28.37 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

Exterior Screw Kit, 70 Barracuda Exterior Screw Kit, 70 Barracuda
Order number: MO-1950A
Content: 1 Set(s)
€33.01 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

Oil Service Set Oil Service Set
Order number: MPSP-113-KNN-S
€76.78 *

2-3 weeks

Radiator B-/E-Body, 22″, 73, BBM, Standard, M/T Radiator B-/E-Body, 22″, 73, BBM, Standard, M/T
Order number: CU036401SND
Content: 1 Piece
€1,314.27 *

4-6 Weeks if in stock at Manufacture

Clip Molding plastic unsiversal Clip Molding plastic unsiversal
Order number: FA-286
€1.08 *

6 Weeks if in stock at Manufacture

Quarter Window Roller Kit 66-70 B-Body Quarter Window Roller Kit 66-70 B-Body
Order number: MOP-1000119
€113.51 *

2-8 Weeks if in stock at Manufacture

Headlight Trim Ring Set 64-76 Mopar 3-Tab Headlight Trim Ring Set 64-76 Mopar 3-Tab
Order number: MOP-MD9502
€252.46 *

4-6 Weeks if in stock at Manufacture

Horn Mopar 68-74 Hi & Low Note, see Applications Horn Mopar 68-74 Hi & Low Note, see Applications
Order number: MOP-MH109
€193.04 *

4-6 Weeks if in stock at Manufacture

Steering Wheel, Classic Nostalgia, Tuff Wheel Style, 15 in. Steering Wheel, Classic Nostalgia, Tuff Wheel Style, 15 in.
Order number: GRT-846
€200.66 *

5-13 days if in stock at Manufacture

Battery Disconnect Switch Battery Disconnect Switch
Order number: KCW-10640
Content: 1 Piece
€37.78 *

5-13 days if in stock at Manufacture

Dash Trim, lower right 70-74 E-Body (except 70 Challenger) Dash Trim, lower right 70-74 E-Body (except 70 Challenger)
Order number: MOP-DT71ERH
Content: 1 Piece
€151.20 *

2-4 Weeks if in stock at Manufacture

Gas Cap A-Body 1960-66, B-Body 1963-64, Chrome Gas Cap A-Body 1960-66, B-Body 1963-64, Chrome
Order number: MOP-MP71004
Content: 1 Piece
€142.00 *

4-6 Weeks if in stock at Manufacture

Special offer
Driveshaft Loop Round QUICK-RELEASE Style Driveshaft Loop Round QUICK-RELEASE Style
Order number: VVN-6010
€64.99 * €850.75 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

Car Model Set, Mopar Garage 1:64, Set of 6 Car Model Set, Mopar Garage 1:64, Set of 6
Order number: MPSP-129
€59.99 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

Alternator PowerGen, 90Amp, 12V, black powdercoated 1957-61 Alternator PowerGen, 90Amp, 12V, black powdercoated 1957-61
Order number: PWM-82112
Content: 1 Piece
€499.11 *

4-6 Weeks if in stock at Manufacture

Fan Shroud 26″ C-Body 1966-70 Fan Shroud 26″ C-Body 1966-70
Order number: CHCFAN001
Content: 1 Piece
€354.03 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

Fuel Pump to Carb Line 1968-69, 383/440 w/ Carter AFB 4-bbl, 2 Lines Fuel Pump to Carb Line 1968-69, 383/440 w/ Carter AFB 4-bbl, 2...
Order number: RPC6805
Content: 1 Piece
€36.35 *

4-8 Weeks if in stock at Manufacture

Resonator 2,5″ Resonator 2,5″
Order number: MBR-R1012
Content: 1 Piece
€156.10 *

5-13 days if in stock at Manufacture

MEGA Splash Shield Set, 70-72 Dart M/T MEGA Splash Shield Set, 70-72 Dart M/T
Order number: ADA7072SS91
Content: 1 Set(s)
€55.87 *

2-4 weeks

Front Bucket Covers 66 Sport Fury, red Front Bucket Covers 66 Sport Fury, red
Order number: AA66CF00010520
Content: 1 Pair
€960.70 *

10-12 Weeks if in stock at Manufacture

Headers A-Body Ceramic Coated with a Thermal Barrier Headers A-Body Ceramic Coated with a Thermal Barrier
Order number: TTI340A17835-C4
Content: 1 Pair
€1,236.89 *

2-4 Weeks if in stock at Manufacture

Brake Caliper Hardware Kit 71 B-/E-Body Brake Caliper Hardware Kit 71 B-/E-Body
Order number: MOP-4719-1
€168.62 *

3-6 Weeks if in stock at Manufacturef

Intake Manifold BBM RB-Engine 413, 426, 440cui Cross Ram Indy Max Wedge 2 x 4-bbl Intake Manifold BBM RB-Engine 413, 426, 440cui Cross Ram Indy...
Order number: IND-440-I4-25
Content: 1 Piece
€1,488.23 *

4-6 Weeks if in stock at Manufacture

Carpet Set C-Body 65-68 New Yorker, Red/Burgundy Carpet Set C-Body 65-68 New Yorker, Red/Burgundy
Order number: OAM-53649-525
Content: 1 Piece
€418.07 *

5-13 days if in stock at Manufacture

12MM ALUMINUM CRUSH WASHER 10PK 12MM ALUMINUM CRUSH WASHER 10PK
Order number: FRA-999212
Content: 1 Piece
€6.10 *

1-4 weeks

KOOL TOOL FITS 4, 6, 8 KOOL TOOL FITS 4, 6, 8
Order number: FRA-900510
Content: 1 Piece
€131.42 *

1-4 weeks

#10 PUSH LOCK HOSE 3 FEET #10 PUSH LOCK HOSE 3 FEET
Order number: FRA-803010
Content: 1 Piece
€29.99 *

1-4 weeks

#3 X 7/16-24 BRAKE ADAPTER - STEEL #3 X 7/16-24 BRAKE ADAPTER - STEEL
Order number: FRA-650304
Content: 1 Piece
€6.78 *

1-4 weeks

#12 NUT X #8 MALE SWIVEL REDUCER #12 NUT X #8 MALE SWIVEL REDUCER
Order number: FRA-497212
Content: 1 Piece
€13.82 *

1-4 weeks

#8 MALE WELD BUNG #8 MALE WELD BUNG
Order number: FRA-497108
Content: 1 Piece
€7.03 *

1-4 weeks

#8 BULKHEAD NUT #8 BULKHEAD NUT
Order number: FRA-492408
Content: 1 Piece
€2.88 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

Carburetor Inlet Fitting 9/16-24 Demon to AN6 Carburetor Inlet Fitting 9/16-24 Demon to AN6
Order number: FRA-491951
Content: 1 Piece
€7.26 *

1-4 weeks

#10 FUEL CELL BULKHEAD W/WASHERS & NUT, BLACK #10 FUEL CELL BULKHEAD W/WASHERS & NUT, BLACK
Order number: FRA-483110-BL
Content: 1 Piece
€21.71 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

AN to NPT Fitting -06 AN to 1/4″ NPT, 45 Degree, blue AN to NPT Fitting -06 AN to 1/4″ NPT, 45 Degree, blue
Order number: FRA-482306
Content: 1 Piece
€7.50 *

1-4 weeks

#6 BULKHEAD TEE-ON THE RUN BLACK #6 BULKHEAD TEE-ON THE RUN BLACK
Order number: FRA-480406-BL
Content: 1 Piece
€18.58 *

1-4 weeks

″#6 HOSE ASSEMBLY STR X 45 STEEL NUT 48″″″ ″#6 HOSE ASSEMBLY STR X 45 STEEL NUT 48″″″
Order number: FRA-374048
Content: 1 Piece
€61.84 *

1-4 weeks

″#6 HOSE ASSEMBLY STR X 90 STEEL NUT 48″″″ ″#6 HOSE ASSEMBLY STR X 90 STEEL NUT 48″″″
Order number: FRA-372048
Content: 1 Piece
€61.84 *

1-4 weeks

Viewed

Mopar Fast Forward Look

All classic wear parts are available##In case of doubt – just ask us!