Headers B-/E-Body BBM 440 1-7/8″ polished ceramic coated out- & inside

Headers B-/E-Body BBM 440 1-7/8″ polished ceramic coated out- & inside
€1,370.32 *
Content: 1 Pair

Prices incl. VAT plus shipping costs

2-4 Weeks if in stock at Manufacture

  • TTi Performance Exhaust and Headers
  • TTI440-178C5
Questions about the article? Write us!
62-74 B-Body 70-74 E-Body 1 7/8″ primary tubes with 3″ collectors Polished Ceramic Coated... more

Product information

"Headers B-/E-Body BBM 440 1-7/8″ polished ceramic coated out- & inside"
62-74 B-Body
70-74 E-Body
1 7/8″ primary tubes with 3″ collectors
Polished Ceramic Coated with Thermal Barrier

Header Finish

C0 - Raw (Bare Mild Steel
C1 - Nickel Chrome Plated
C4 - Ceramic Coated with a Thermal Barrier
C5 - Polished Ceramic Coated with a Thermal Barrier


Bei Bestellung benötigen wir die folgenden Daten:

• Welcher Motor ist verbaut?
• Welches Getriebe, AT oder MT, ist verbaut?
• Wenn M/T dann ist der Durchmesser des Flywheel (9“, 10,5“ oder 11“) erforderlich
• Baujahr, Marke, Modell
• Deck Height: B/RB & Gen2?
• Zylinderkopf Marke und Modell
• Getriebe: A/T oder M/T
• Gen3 Hemi, auf welcher Seite ist der Anlasser? Auf der Fahrerseite oder auf der Beifahrerseite
• Bei Bestellung von Fächerkrümmern ist die Rohrgröße erforderlich: 2.5”, 3.0“, 3.5” oder 4.0”

• Genaue Infos bezüglich Passungsproblemen bitte vor dem Kauf hier nachlesen, bei Fragen stehen wir natürlich gerne zur Verfügung!
• http://www.ttiexhaust.com/Category-ClassicHeaders/440-178/TTi440-178.htm


• We need following data by order:


• which engine
• which transmission, AT or MT
• If Standard Trans, Flywheel size required: 9“, 10,5“ or 11”
• construction year, make, model
• Suspension: Stock (with torsion bars) or Coilover (no torsion bars)
• If Coilover, make and model required
• Cylinder head make and model
• Deck Height (B/RB &Gen2 Hemis): Low-port or Raised-port
• Gen3 Hemis, what side is starter on? Drivers-side or Passenger-side
• When ordering Headers, the exhaust system tube size is required: 2.5”, 3.0”
3.5” or 4.0” (This is required for us to supply the correct size header adapter / reducers to transition the headers to the exhaust system)

bei TTI Krümmern ist immer dabei:

-Fächerkrümmerdichtungen (zum Kopf)
-Schrauben zum festschrauben der Fächerkrümmer am Kopf
-Reducer (hier bitte angeben welchen durchmesser die Auspufanlage hat)
-Collector dichtungen
-Schrauben für das festschrauben des Reducers an den Collector



Valve Cover Note: Due to the numerous valve cover designs, it will be necessary to measure the width of the valve covers. TTi's big block production-run headers are designed to clear cast aluminum and stamped steel valve covers with widths dimensions of 4.065″ - 4.300″ .
Year: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974
Header Finish: Polished Ceramic Coated with a Thermal Barrier
Make: DODGE, PLYMOUTH
Fahrzeug Model: BARRACUDA, BELVEDERE, CHALLENGER, CHARGER, CORONET, DART, GTX, POLARA, ROADRUNNER, SATELLITE, SAVOY
Body: B-Body, E-Body
Engine Family: Mopar big block RB
Engine Size: 6.8L/413, 7.0L/426, 7.2L/440
Produktgruppe: Headers
Pack size: 1230 × 460 × 310 mm
Weight: 42 kg
Emblem ″Dodge″ 72 Charger SE Models 71-74 Charger Trunk Emblem ″Dodge″ 72 Charger SE Models 71-74 Charger Trunk
Order number: MOP-VC0687T
Content: 1 Piece
€71.48 *

2-4 Weeks if in stock at Manufacture

Main Bearing Snap Ring Kit, 4 PCS, assorted Main Bearing Snap Ring Kit, 4 PCS, assorted
Order number: SRP
€8.26 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

#3 X 10MM BANJO 20 DEGREE - SIDE #3 X 10MM BANJO 20 DEGREE - SIDE
Order number: FRA-620004
Content: 1 Piece
€12.32 *

1-4 weeks

Plug 1/16″ NPT Pipe Plug black Plug 1/16″ NPT Pipe Plug black
Order number: FRA-493201-BL
Content: 1 Piece
€3.07 *

1-4 weeks

″#6 HOSE ASSEMBLY STR X 90 STEEL NUT 72″″″ ″#6 HOSE ASSEMBLY STR X 90 STEEL NUT 72″″″
Order number: FRA-372072
Content: 1 Piece
€74.57 *

1-4 weeks

Heater Hose Fitting Kit Big Block & Hemi 1970-78 Heater Hose Fitting Kit Big Block & Hemi 1970-78
Order number: MOP-HNK-2
Content: 1 Pair
€18.85 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

Starter Mopar Lightweight 200-foot pound torque fits TTI Headers Starter Mopar Lightweight 200-foot pound torque fits TTI Headers
Order number: PWM-9523
Content: 1 Piece
€476.48 *

4-6 Weeks if in stock at Manufacture

Headliner B-Body 71 Charger, Roadrunner, Satellite Headliner B-Body 71 Charger, Roadrunner, Satellite
Order number: HL71CRX607
Content: 1 Piece
€181.81 *

10-12 Weeks if in stock at Manufacture

Rear Bench Cover 66 Satellite Rear Bench Cover 66 Satellite
Order number: AA66CR00040100
Content: 1 Piece
€692.43 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

Transmission Pan Filter & Gasket A727 & A904 1965-97 Transmission Pan Filter & Gasket A727 & A904 1965-97
Order number: FRM-FT1039A
Content: 1 Set(s)
€14.99 *

5-13 days if in stock at Manufacture

Special offer
Cylinder Head BBM Aluminium, Chamber vol 84cc, straight Plug Cylinder Head BBM Aluminium, Chamber vol 84cc, straight Plug
Order number: MsPro-09-CYH-10S
Content: 1 Pair
€1,559.00 * €1,617.21 *
Valve Exhaust 1,74″ BBM 1968-78 Portflow Series 4 groove Valve Exhaust 1,74″ BBM 1968-78 Portflow Series 4 groove
Order number: SEV-2665
Content: 1 Piece
€15.28 *

2-4 Weeks if in stock at Manufacture

Emblem ″R/T″ 69 Charger 67/69 Coronet Quarter Panel Emblem ″R/T″ 69 Charger 67/69 Coronet Quarter Panel
Order number: MOP-VC1812
Content: 1 Piece
€98.57 *

2-4 Weeks if in stock at Manufacture

Air grabber and Ram Air box seal Clips & Screws, 69-72 B-Body Air grabber and Ram Air box seal Clips & Screws, 69-72 B-Body
Order number: BXX6972AG03
Content: 1 Piece
€40.48 *

2-4 Weeks if in stock at Manufacture

Piston Set 440 flat, forged, +0,030″ over 1,094 Pin Piston Set 440 flat, forged, +0,030″ over 1,094 Pin
Order number: UEM-IC9953-030
Content: 1 Set(s)
€829.04 *

5-13 days if in stock at Manufacture

Gauge, Voltmeter GS Series 2-1/16″ electrical Gauge, Voltmeter GS Series 2-1/16″ electrical
Order number: ATM-3892
Content: 1 Piece
€119.19 *

5-13 days if in stock at Manufacture

Drip Rail to Roof Sealing Strips Rolls 68-70 B-Body Drip Rail to Roof Sealing Strips Rolls 68-70 B-Body
Order number: BXX6870DR01
€27.77 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

T-Shirt, Mopar Nationals 2018, Size L T-Shirt, Mopar Nationals 2018, Size L
Order number: MPSP-N18-TSL
Content: 1 Piece
€14.99 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

Piston Set 318 stroker, dished Top, +0.040″ forged Piston Set 318 stroker, dished Top, +0.040″ forged
Order number: UEM-IC847-040
Content: 1 Set(s)
€994.49 *

5-13 days if in stock at Manufacture

Transmission Rebuilt Service A727 / A904 (Price can change!) Transmission Rebuilt Service A727 / A904 (Price can change!)
Order number: MPSP-135
€2,095.80 *

7-14 Tage

Pinstripe Kit, Red Dual 69 Road Runner Pinstripe Kit, Red Dual 69 Road Runner
Order number: MOP-CH996RED
€187.46 *

2-4 Weeks if in stock at Manufacture

Headers A-/B-/E-Body 318/340 1-5/8″ Shorty-Version nickel-chrome coated Headers A-/B-/E-Body 318/340 1-5/8″ Shorty-Version...
Order number: TTI34025-C1
Content: 1 Pair
€832.60 *

2-4 Weeks if in stock at Manufacture

Brake Line Front to Rear A-Body 72-74 Brake Line Front to Rear A-Body 72-74
Order number: YIN7301SS
Content: 1 Piece
€171.35 *

4-8 Weeks if in stock at Manufacture

Ignition Coil Bracket, 67-79 SBM Ignition Coil Bracket, 67-79 SBM
Order number: MOP-2670
€27.49 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

Tire Sportsman S/R, LT 29x18R15, Radial, Blackwall, Tire Sportsman S/R, LT 29x18R15, Radial, Blackwall,
Order number: MTT-6655
Content: 1 Piece
€671.30 *

5-13 days if in stock at Manufacture

Tire ET Drag Slick 28 x 10,5-15W Tire ET Drag Slick 28 x 10,5-15W
Order number: MTT-30551
Content: 1 Piece
€503.44 *

5-13 days if in stock at Manufacture

Clip Side Trim Set, B-Body 66-67 Charger Clip Side Trim Set, B-Body 66-67 Charger
Order number: MOP-1000159
Content: 1 Set(s)
€95.70 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

Front Bucket Covers 66 Sport Fury, black Front Bucket Covers 66 Sport Fury, black
Order number: AA66CF00010100
Content: 1 Pair
€960.70 *

10-12 Weeks if in stock at Manufacture

Clutch/brake pedal assembly rebuild kit Clutch/brake pedal assembly rebuild kit
Order number: CPA-RBK
Content: 1 Set(s)
€66.83 *

2-4 Weeks if in stock at Manufacture

Accelerator Pump Cam Kit Holley, 2300/4150/4160 Accelerator Pump Cam Kit Holley, 2300/4150/4160
Order number: AED-5560
Content: 1 Piece
€32.73 *

5-13 days if in stock at Manufacture

3 Point Seatbelt Conversion Kit, 68-70 B-Body, Buckets, black w/ black Buckle 3 Point Seatbelt Conversion Kit, 68-70 B-Body, Buckets, black...
Order number: SBS-3-6870B21000BU
€357.36 *

4-6 Weeks if in stock at Manufacture

Hood Bumper, Hood to fender edge, some C-Body 65-68 Hood Bumper, Hood to fender edge, some C-Body 65-68
Order number: STEE-70-2046-42
Content: 1 Pair
€42.65 *

4-8 Weeks if in stock at Manufacture

Transmission Pan A727 Aluminium 3,5 Quarts extra Transmission Pan A727 Aluminium 3,5 Quarts extra
Order number: AAA-22730E
€264.19 *

1-3 Weeks if in stock at Manufacture

Conversion Kit to Saginaw Powersteering BBM Conversion Kit to Saginaw Powersteering BBM
Order number: MPSP-45
€408.56 *

2-3 weeks

Exhaust Tips 3,00″ universal, stainless steel, turndown Exhaust Tips 3,00″ universal, stainless steel, turndown
Order number: PYE-PVD13
Content: 1 Pair
€120.52 *

5-13 days if in stock at Manufacture

Console Top Plate 66-68 B-Body Console Top Plate 66-68 B-Body
Order number: MOP-131A-6
Content: 1 Set(s)
€483.26 *

2-4 Weeks if in stock at Manufacture

Bumper, Rear 71 Charger w/o jack slots Bumper, Rear 71 Charger w/o jack slots
Order number: AMD-990-2671
Content: 1 Piece
€909.61 *

2-4 Weeks if in stock at Manufacture

Hood to Cowl Seal E-Body 70-74 Hood to Cowl Seal E-Body 70-74
Order number: MTR-CS_20-Z
Content: 1 Piece
€49.35 *

6 Weeks if in stock at Manufacture

#6 X 90 DEG BENT TUBE CRIMP W/PIN & COLLAR-20PCS #6 X 90 DEG BENT TUBE CRIMP W/PIN & COLLAR-20PCS
Order number: FRA-6202023
Content: 1 Piece
€352.22 *

1-4 weeks

#4 ALUM. CRUSH WASHER - AN-901 10PK #4 ALUM. CRUSH WASHER - AN-901 10PK
Order number: FRA-999202
Content: 1 Piece
€5.49 *

1-4 weeks

Viewed

Small, but watch out!

A-Bodies like Dart, Duster, Barracuda or Valiant are agile, "small" fun machines!
You need parts, we can supply you.