Headers B-/E-Body Hemi 426-1RA 2-1/4″ Legend polished ceramic coated out- & inside

Headers B-/E-Body Hemi 426-1RA 2-1/4″ Legend polished ceramic coated out- & inside
€1,519.32 *
Content: 1 Pair

Prices incl. VAT plus shipping costs

2-4 Weeks if in stock at Manufacture

  • TTi Performance Exhaust and Headers
  • TTI528INDY-214C5
Questions about the article? Write us!
66-74 B-Body 70-74 E-Body 2 1/4″ primary Tubes with 4″ collectors Polished Ceramic Coated... more

Product information

"Headers B-/E-Body Hemi 426-1RA 2-1/4″ Legend polished ceramic coated out- & inside"
66-74 B-Body
70-74 E-Body
2 1/4″ primary Tubes with 4″ collectors
Polished Ceramic Coated with Thermal Barrier

Header Finish

C0 - Raw (Bare Mild Steel
C1 - Nickel Chrome Plated
C4 - Ceramic Coated with a Thermal Barrier
C5 - Polished Ceramic Coated with a Thermal Barrier


Bei Bestellung benötigen wir die folgenden Daten:

• Welcher Motor ist verbaut?
• Welches Getriebe, AT oder MT, ist verbaut?
• Wenn M/T dann ist der Durchmesser des Flywheel (9“, 10,5“ oder 11“) erforderlich
• Baujahr, Marke, Modell
• Deck Height: B/RB & Gen2?
• Zylinderkopf Marke und Modell
• Getriebe: A/T oder M/T
• Gen3 Hemi, auf welcher Seite ist der Anlasser? Auf der Fahrerseite oder auf der Beifahrerseite
• Bei Bestellung von Fächerkrümmern ist die Rohrgröße erforderlich: 2.5”, 3.0“, 3.5” oder 4.0”

• Genaue Infos bezüglich Passungsproblemen bitte vor dem Kauf hier nachlesen, bei Fragen stehen wir natürlich gerne zur Verfügung!
• http://www.ttiexhaust.com/Category-ClassicHeaders/440-178/TTi440-178.htm


• We need following data by order:


• which engine
• which transmission, AT or MT
• If Standard Trans, Flywheel size required: 9“, 10,5“ or 11”
• construction year, make, model
• Suspension: Stock (with torsion bars) or Coilover (no torsion bars)
• If Coilover, make and model required
• Cylinder head make and model
• Deck Height (B/RB &Gen2 Hemis): Low-port or Raised-port
• Gen3 Hemis, what side is starter on? Drivers-side or Passenger-side
• When ordering Headers, the exhaust system tube size is required: 2.5”, 3.0”
3.5” or 4.0” (This is required for us to supply the correct size header adapter / reducers to transition the headers to the exhaust system)

bei TTI Krümmern ist immer dabei:

-Fächerkrümmerdichtungen (zum Kopf)
-Schrauben zum festschrauben der Fächerkrümmer am Kopf
-Reducer (hier bitte angeben welchen durchmesser die Auspufanlage hat)
-Collector dichtungen
-Schrauben für das festschrauben des Reducers an den Collector



Valve Cover Note: Due to the numerous valve cover designs, it will be necessary to measure the width of the valve covers. TTi’s big block production-run headers are designed to clear cast aluminum and stamped steel valve covers with widths dimensions of 4.065″ - 4.300″ .
Year: 1962, 1963, 1964, 1965, 1966, 1967, 1968, 1969, 1970, 1971, 1972, 1973, 1974
Header Finish: Polished Ceramic Coated with a Thermal Barrier
Make: DODGE, PLYMOUTH
Fahrzeug Model: BARRACUDA, BELVEDERE, CHALLENGER, CHARGER, CORONET, DART, GTX, POLARA, ROADRUNNER, SATELLITE, SAVOY
Body: B-Body, E-Body
Engine Family: Mopar Hemi Gen II 426cui
Engine Size: 7.0L/426
Produktgruppe: Headers
Pack size: 1230 × 460 × 310 mm
Weight: 42 kg
#8 MALE 90, WITH 1/8 FPT PORT #8 MALE 90, WITH 1/8 FPT PORT
Order number: FRA-997308
Content: 1 Piece
€13.63 *

1-4 weeks

KOOL TOOL FITS 4, 6, 8 KOOL TOOL FITS 4, 6, 8
Order number: FRA-900510
Content: 1 Piece
€131.42 *

1-4 weeks

#4 X 1/8 FPT TUBING ADAPTER #4 X 1/8 FPT TUBING ADAPTER
Order number: FRA-650207
Content: 1 Piece
€6.74 *

1-4 weeks

″#3 CLEAR COVERED ASSY, STR X STR 22″″″ ″#3 CLEAR COVERED ASSY, STR X STR 22″″″
Order number: FRA-311022
Content: 1 Piece
€23.16 *

1-4 weeks

Head Studs SBM W5 & W7 & Magnum Head Studs SBM W5 & W7 & Magnum
Order number: ARP-144-4203
Content: 1 Set(s)
€315.81 *

5-13 days if in stock at Manufacture

Window Quarter 1971 Plymouth RH Tinted HT Window Quarter 1971 Plymouth RH Tinted HT
Order number: AMD-795-1471-TR
Content: 1 Piece
€199.90 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

Main Bearing Set SBM 273/318/340cui, 59-73, 0.040″ Undersize Main Bearing Set SBM 273/318/340cui, 59-73, 0.040″ Undersize
Order number: CLE-MS540P40
Content: 1 Set(s)
€147.69 *

5-13 days if in stock at Manufacture

Intake Manifold Bolt Kit HEMI Black oxide,12-Point Head Intake Manifold Bolt Kit HEMI Black oxide,12-Point Head
Order number: IND-426-24
Content: 1 Set(s)
€38.68 *

4-6 Weeks if in stock at Manufacture

Emblem ″by Plymouth″ 71-74 Tail Panel Emblem ″by Plymouth″ 71-74 Tail Panel
Order number: MOP-VC9542
Content: 1 Piece
€86.68 *

2-4 Weeks if in stock at Manufacture

Radio Bezel 69 Charger & other B-Body with Ralley Cluster Radio Bezel 69 Charger & other B-Body with Ralley Cluster
Order number: CHBRFP101
Content: 1 Piece
€62.26 *

2-4 Weeks if in stock at Manufacture

Gauge, Temperature 70 Challenger Gauge, Temperature 70 Challenger
Order number: OER-2984160
Content: 1 Piece
€231.26 *

5-13 days if in stock at Manufacture

Emblem Plymouth Satellite 67 Fender Emblem Plymouth Satellite 67 Fender
Order number: MOP-VC2266
Content: 1 Piece
€76.46 *

2-4 Weeks if in stock at Manufacture

Pilot Bushing Mopar, Needle Bearing Insert 1992-2015 Pilot Bushing Mopar, Needle Bearing Insert 1992-2015
Order number: CWA-53009181
Content: 1 Piece
€17.35 *

5-13 days if in stock at Manufacture

Rear Main Seal BBM End Strips O-Ring Type, Viton Rear Main Seal BBM End Strips O-Ring Type, Viton
Order number: RS16403
Content: 1 Pair
€1.88 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

Fuel Injection System, Pro-Flo 4, SBM 318, 340, 360cui, with Tablet Fuel Injection System, Pro-Flo 4, SBM 318, 340, 360cui, with...
Order number: EDL-35900
Content: 1 Piece
€3,133.04 *

5-13 days if in stock at Manufacture

Power Valve, Four Door, Single Stage, 9.5 in. Hg Power Valve, Four Door, Single Stage, 9.5 in. Hg
Order number: QFT-25-95QFT
Content: 1 Piece
€15.12 *

5-13 days if in stock at Manufacture

Wheel, Wheel Circle Track, Series 50, Steel, 15 ″ x 8 ″, 5 x 4.500″ Bolt Circle, 4.00 Backspacing Wheel, Wheel Circle Track, Series 50, Steel, 15 ″ x 8 ″, 5 x...
Order number: AEO-50-084540
€121.87 *

5-13 days if in stock at Manufacture

Piston Set 440 flat, forged, +0,055″ over 1,094 Pin, including Rings Piston Set 440 flat, forged, +0,055″ over 1,094 Pin, including...
Order number: WIS-PTS531A55
Content: 1 Piece
€887.75 *

5-13 days if in stock at Manufacture

Stroker Kit 440cui to 512cui dished piston +0,055″ Stroker Kit 440cui to 512cui dished piston +0,055″
Order number: VVN-440.512.5070
Content: 1 Set(s)
€3,912.30 *

2-8 Weeks if in stock at Manufacture

Tool Ignition Test Tool Tool Ignition Test Tool
Order number: MSD-89981
Content: 1 Piece
€371.17 *

5-13 days if in stock at Manufacture

T-Shirt, Short Sleeve, Cotton, Mopar Logo L T-Shirt, Short Sleeve, Cotton, Mopar Logo L
Order number: SPJ-E1606T-LG
Content: 1 Piece
€18.83 *

5-13 days if in stock at Manufacture

Fuse Box Clip 12 ga Fuse Box Clip 12 ga
Order number: EWH-FBC1
€3.01 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

Oil Dipstick Tube Engine Hemi 426cui 1964-71 Oil Dipstick Tube Engine Hemi 426cui 1964-71
Order number: MOP-6243
€30.94 *

3-6 Weeks if in stock at Manufacturef

Brake Line Front to Rear A-Body 67-70 Brake Line Front to Rear A-Body 67-70
Order number: YIN6702SS
Content: 1 Piece
€137.77 *

4-8 Weeks if in stock at Manufacture

Fuel Pump to Carb Line 1971 Fuel Pump to Carb Line 1971
Order number: RPC7102SS
€37.31 *

4-8 Weeks if in stock at Manufacture

Fender Patch, Lower Rear, 68-70 Charger LH Fender Patch, Lower Rear, 68-70 Charger LH
Order number: AMD-205-2668-L
Content: 1 Piece
€145.75 *

2-4 Weeks if in stock at Manufacture

Radiator Hose 80-81 Cadillac Radiator Hose 80-81 Cadillac
Order number: DAC-70767
Content: 1 Piece
€20.55 *

5-13 days if in stock at Manufacture

Rear Bench Cover 69 Chrysler 300 & Newport Conv., green Rear Bench Cover 69 Chrysler 300 & Newport Conv., green
Order number: AA69CM00050434
Content: 1 Piece
€812.67 *

10-12 Weeks if in stock at Manufacture

Radiator Mounting Bolt Kit Radiator Mounting Bolt Kit
Order number: BCI-72131
€31.05 *

5-13 days if in stock at Manufacture

Kickdown Linkage, 426 Hemi Kickdown Linkage, 426 Hemi
Order number: AAA-42624B3P
€472.33 *

1-3 Weeks if in stock at Manufacture

Sway Bar Front A-Body 1963-66 1 1/4″ Hollow Sway Bar Front A-Body 1963-66 1 1/4″ Hollow
Order number: HEL-55914
€427.86 *

5-13 days if in stock at Manufacture

Differential Chrysler 9 1/4″, Eaton Detroit True Trac Differential Chrysler 9 1/4″, Eaton Detroit True Trac
Order number: DTL-913A368
Content: 1 Piece
€1,017.74 *

5-13 days if in stock at Manufacture

Disc Brake Rotor 11,00″ L/H Rear Disc Brake Rotor 11,00″ L/H Rear
Order number: WIL-160-11375-BK
€357.60 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

Intake Manifold HEMI GEN III 6,1L Mod Man for Supercharger Intake Manifold HEMI GEN III 6,1L Mod Man for Supercharger
Order number: IND-6.1-I4-MM-SC
Content: 1 Set(s)
€823.00 *

4-6 Weeks if in stock at Manufacture

AN auf NPT Adapter Verschraubung AN auf NPT Adapter Verschraubung
Order number: AER-FBM5039
Content: 1 Piece
€20.88 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

Forward Headlight Harness 1970 B-Body Charger Forward Headlight Harness 1970 B-Body Charger
Order number: HWH-70CHAR
Content: 1 Piece
€338.52 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

#4 CLAMP - PAIR #4 CLAMP - PAIR
Order number: FRA-999154
Content: 1 Pair
€2.40 *

Ready to ship today, Delivery time appr. 1-3 days (foreign countries vary)

#3 STEEL SOCKET - ONLY #3 STEEL SOCKET - ONLY
Order number: FRA-999023
Content: 1 Piece
€4.68 *

1-4 weeks

Carburetor Feed Line 4150 Holley #8 FUEL LINE KIT Carburetor Feed Line 4150 Holley #8 FUEL LINE KIT
Order number: FRA-920003
Content: 1 Piece
€95.77 *

1-4 weeks

Y-Fitting, 10AN Male Inlet x 8AN Male Outlets, BLACK Y-Fitting, 10AN Male Inlet x 8AN Male Outlets, BLACK
Order number: FRA-900611-BL
Content: 1 Piece
€41.88 *

1-4 weeks

Viewed

Mopar Performance

Powerful through "the right Combination"
Tell us your target and we make you an offer with all necessary parts