Gaszug Halterung Extra Hoch 413/426/440 mit Kickdownaufnahme

Gaszug Halterung Extra Hoch 413/426/440 mit Kickdownaufnahme

Artikelnummer: AR018
Kategorie: Motoren & -teile
Hersteller: Indy Cylinder Head

81,31 €

inkl. 19% USt. , zzgl. (Standard)

Muss bestellt werden. Ab Bestellung lieferbar in 42 Tagen.
Lieferzeit: 43 - 45 Werktage (Ausland)

Set(s)

Beschreibung

his throttle bracket is designed to work with an Edelbrock Performer RPM manifold on a RB engine (413, 426W or 440), or intakes which are similiar height. The bracket is the correct height to allow you to hook up a factory 3-part kickdown linkage to a factory carburetor when using a taller intake manifold. The vertical rod in the kickdown linkage will need to be adjusted almost to the end of its range in order for it to be tall enough to work, but it will fit. Use with the AR008 throttle return kit

We recommend the use of the AR008, or AR119, throttle return spring kit with this throttle bracket. We also recommend that you double check your throttle cable for proper operation. In many cases, you’ll require a longer throttle cable when using a tallerbracket such as this. Several different throttle cables are still available from your local Chrysler dealer if you need a longer one.

A Produktgruppe:	Gaszug-Befestigungen Gaszüge
Motor Familie:	Mopar big block RB
Motor Hubraum:	6.8L/413 7.0L/426
Versandgewicht:	0,52 kg
Artikelgewicht:	0,50 kg
Abmessungen ( Länge × Breite × Höhe ):	20,00 × 20,00 × 6,50 cm