Produktbeschreibung
Retro Radio in originaler Optik mit modernen Anschlüssen für Ipod/Ipad und USB auf der Rückseite.
Version mit schwarzen Knöpfen
The radio is the only made-for-iPod®/iPhone® radio available for your classic 1969 Dodge Charger / Daytona. With classic Mopar style thumb-roller controls, is looks like the original factory radio, but includes all the features of a modern car stereo. Hands-free Bluetooth® phone operation is built-in, and you can stream audio wirelessly from your iPhone® or any Android®-basedphone. It features 32,000 color LCD display, two sets of RCA pre-outs and subwoofer output. Two rear auxiliary inputs for portable devices and two rear USB inputs for iPod® or a USB flash drive are included. The radio has separate radio display and push-button assemblies that are independently adjustable thanks to a patented InfiniMount system. This is the most technologically advanced radio ever produced for vintage Mopar vehicles.
FM
_
Tuning Range (USA, EUR, AUS, JAP, RUS tuning capable) with RDS _87.5-107.9MHz
Antenna Terminal __External Antenna Connector
Usable Sensitivity __12.5 dBf
Selectivity __75 dB @ 400kHz
Signal to Noise Ratio _62 dB (Stereo), 67 dB (mono)
Harmonic Distortion @ 1 kHz _0.8% (stereo), 0.5% (mono)
Separation __32 dB @ 1kHz
Frequency Response _30-16,000 Hz
AM (EU and US Tuning Capable)
_
Tuning Range (USA, EUR, AUS, JAP, RUS tuning capable) _530-1710 kHz
Antenna Terminal _External Antenna Connector
General
_
Dimensions (display face) ___3.5”W x 1” H x 2.5” D
Dimensions (push-buttons) ___3.5”W x .5” H
Dimensions (radio body) ___3.96”W x 1.98”H x 4.30”D
Power Requirements ___10.5-14.4 volts
Current Consumption (during operation) _Max. 15A
Current Consumption (car off) __<3.5 mA
Output Power (@ 14.4 volts @ 4ohm @ 1% THD) 25x4 watts RMS 45x4 Max Power
Output Impedance ____4ohm
Low Level Output (4 channels) __2.85 volts
AUX 1 Input ____>300 mV / 6 kO
AUX 2 Input ____>300 mV / 6 kO
USB 1 Input ____5V (USB female input)
USB 2 Input ____5V (USB female input)
