Produktbeschreibung
Nockenwelle, 270 H, Magnum, für Hydrostößel, Timing 270/270-224/224-.470/.470-110, Big Block Mopar 361, 383, 400, 413, 426wedge, 440 cui, einzeln
Camshaft, 270H, Magnum, Hydraulic Flat Tappet, 270/270-224/224-.470/.470-110
The cam for your street/strip car.
Designed for hot street/strip cars, these Comp Cams Magnum series cams require a higher compression ratio, rear-end gear ratio, and stall torque converter than stock. With a very aggressive profile, these camshafts provide maximum top-end performance for your high performance car.
Brand:_COMP Cams
Product Line:_COMP Cams Magnum Hydraulic Camshafts
Part Type:_Camshafts
Cam Style: _Hydraulic flat tappet
Basic Operating RPM Range: _1,800-5,500
Intake Duration at 050 inch Lift: _224
Exhaust Duration at 050 inch Lift: _224
Duration at 050 inch Lift: _224 int./224 exh.
Advertised Intake Duration: _270
Advertised Exhaust Duration: _270
Advertised Duration: _270 int./270 exh.
Intake Valve Lift with Factory Rocker Arm Ratio: _0.470 in.
Exhaust Valve Lift with Factory Rocker Arm Ratio: _0.470 in.
Valve Lift with Factory Rocker Arm Ratio: _0.470 int./0.470 exh.
Lobe Separation (degrees): _110
Camshaft Gear Attachment: _1-bolt
Computer-Controlled Compatible: _No
Grind Number: _CRB 270H-10Valve Springs Required: _Yes
Quantity: _Sold individually.
Notes: _Single-bolt camshaft.
Camshaft, 1-Bolt, Hydraulic Flat Tappet, Advertised Duration 270/270, Lift .470/.470, Mopar, Big Block, Each
Give your high performance engine the camshaft itdeserves.
Designed for hot street/strip cars, these COMP Cams Magnum series cams require a higher compression ratio, rear-end gear ratio, and stall torque converter than stock. With a very aggressive profile, these camshafts provide maximum top-end performance for your high performance car.
