Product Description
Wandler A-727 12in. Street ca. 2000rpm Schließdrehzahl RATED UP TO 350 HP & 350 FT-LBS (475 Nm) Tork Master Serie > High stall performance at an incredible valuein. these are excellent all-around performance street converters. Even without a highly modified engine, these converters will give you better acceleration through a higher stall speed, allowing the engine to develop more torque at the time of initial acceleration. These quality assembled converters are put together with new pump drive tubes, needle bearings were equipped on the original model, and new thrust washers. TorkMaster converters are not to be used with a transbrake. To prevent contamination left from worn parts from being circulated in your new components and causing premature wear, we strongly recommend protecting your investment by adding a B&M transmission cooler with all new transmission installations. *Note: TorkMaster converters are not recommended for higher performance big blocks or super charged engines. Stall speed listings are based on an engine producing 230 ft.lb. of torque at 2,500 RPM. More torque at 2,500 RPM will give you greater than rated stall speed, less torque at 2,500 RPM will give you less than rated stall speed. • Highest Quality “Value Priced” Street Performance Converters Available • New Precision Steel Pump Drive Tube • Needle Bearings where Factory Equipped • New Thrust Washer Between Turbine and Cover Product Specification Fits 1967 to 1981 Chrysler, Dodge, Plymouth Torqueflite A727 automatic transmissions Attention, Chrysler torque converters when used with externally balanced engine require a B&M Flexplate. Features A higher than stock stall speed as delivered by a B&M Converter will provide several advantages. The high stall converter allows the engine to launch the car at a higher RPM where more torque is available and increased strength. Pressure Tested Fully Balanced Needle Thrust Bearing New Precision Pump Drive Tube Torque Converter, Tork Master, 2,000 rpm Stall, Mopar, Torqueflite 727, 11.125 in./ 10 in. Bolt Circles, Each Brand: B&M Manufacturer's Part Number: 10416 Part Type: Torque Converters Product Line: B&M Tork Master Torque Converters Input Spline Quantity: 24 Anti-Ballooning Plate: No Lockup Compatible: No Furnace-Brazed: No Balanced: Yes Mounting Hardware Included: Yes Torque Converter Stall Note: Actual stall speed may differ due to engine combination, gear selection, and vehicle weight. Quantity: Sold individually. Notes: Not recommended for use with High Performance big block or supercharged applications. It would be to weak for that Horsepower range. Tork Master converters are B&M's most affordable performance torque converters. They feature precision pump drive tubes and are pressure tested, fully balanced, and ready to install. The Tork Masters are excellent all-around performance street converters. They are not recommended for big block or supercharged applications.
