Product Description
Modifiziert das Getriebe zu schnelleren,härteren Schaltvorgängen, + freie Gangwahl + freie Wahl des Schaltzeitpunktes More options from your tranny. B&M Transpak kits create new shifting characteristics by re-routing fluids through your transmission's valve body. Each kit includes two options: RV/Heavy Duty and Hi-Performance Street. RV/Heavy Duty is for towing, off-roading, or other heavy-duty use. You get firmer shifts and full manual control over downshifts, with normal automatic operation when in in.drive.in. Hi-Performance Street gives you quicker, snappier shifts than RV/Heavy Duty, with standard shift points and automatic features when in in.drive.in. Transpak™-1966-1977 Chrysler, Dodge, Plymouth TF A-727 & A-904 Recalibrate your automatic transmissionfor optimum performance! Select the mode that best suits your application Improves transmission life Transmission removal not required APPLICATION: ’66-’77 Chrysler, Dodge, Plymouth TF A-727 & A-904 The next step up from the Shift Improver Kit is the Transpak. It has all the features in the Shift Improver Kit plus it provides additional driver manual control (GM TH-400, 350, Ford C-6 & Chrysler Torqueflite only). Most stock automatic transmissions won’t downshift into low gear above 15 mph,and automatically upshift at a predetermined speed no matter what gear you’re in. With the Transpak, you can downshift at any speed, and you can hold the transmission in first gear to any speed that you want! This is an asset when you’ve got a modified engine, and you want additional RPMs, or you’re towing a trailer or driving heavy loads downhill. Stage 1. Heavy Duty For street rods, normal passenger vehicles or other heavy duty use. Firmer shift feel but not harsh. Improves transmission performance andlife dramatically without loss of comfort. Normal automatic operation when in “Drive”. Stage 2. Hi-Performance Street For full performance street use. Essentially the same as Heavy Duty mode except shift is much quicker. Retain full automatic features and standard shift points with selector in “Drive”
