Hoffman's Winners Circle
Artikel 201 - 300 von 391
Zündkabelhalter Set
Ignition Wire Bracket Kit
Kit includes one _J_ bracket, one _AX005_ insulator, one _Q_ bracket, one _O_ bracket, one _P_ bracket, one _L_ bracket, two _M_ b...
Zündkabelhalter Set
Ignition Wire Bracket Kit
Kit includes one _J_ bracket, one _AX005_ insulator, three _0599_ insulators, one _F_ bracket, one _N_ bracket, two _M_ brackets, ...
1969-74 Big Block
Bolts under right thermostat housing retaining screw.
Zündkabelhalter
Ignition Wire Bracket
Bolts under right thermostat housing retaining screw.
1966-68 Big Block
This coil mounting bracket is accurately punched & sheared from correct gauge material with the factory-style extruded & tapped hole for the clamping screw. Comes complete with...
Hochwertige Nachfertigung der vorderen Zugstrebenbuchsen-Abstandshülsen für Mopar B Body (1966–72) und E Body (1970–74). Diese Spacer sind in den meisten neuen Buchsensätzen ni...
Auf Lager
Correct 5/16-24 UNF x 2.50_ hex head sleeve nut. Two required per vehicle.
1968-1970 340 HP
1971-1974 340/360 HP
Correct bolts, hex collar stud, studs, nuts, & conical washers.
1966-1971 426 Hemi
Correct head marking bolts and conical washers.
1967-1969 A-Body ONLY! 383/440 HP
Studs, nuts, & sleeve nuts.
1968-1970 340HP
Correct bolts, studs, nuts, conical washers, & sleeve nuts.
Sway bar end link bushing kit is comprised of (8) correct durometer black bushings, (8) black zinc plated conical washers, and (4) phosphated 5/16-18 nuts. Designed to be used...
Auf Lager
1960-1965 all
Battery hold down strap for all body styles includes a thermo-plastic coated cross bracket.
1970-1971 B- & E-Body
1970-1976 A-Body
Battery hold down strap only includes a thermo-plastic coated cross bracket.
1972-1974 B- & E-Body
Battery hold down strap only includes a thermo-plastic coated cross bracket.
Batterie Haltestab
Battery Hold Down J-Bolt
Used on all battery hold down fender side applications. Zinc phosphate as original.
1960-69 A- & B-Body
Auf Lager
Batterie Haltestangen Set mit Muttern (Paar)
Battery Hold Down J-Bolt Set w/Nuts (Pair)
Battery Hold Down J-Bolt Kit. Zinc phosphate J-bolts with CORRECT 1_ OD washer sems nuts...
Batterie Haltestangen Set mit Muttern (Paar)
Battery Hold Down J-Bolt Set w/Wing Nuts (Pair)
Battery Hold Down J-Bolt Set. Zinc phosphate J-bolts with CORRECT heavy gauge wing ...
Positive Battery Cable Routing Bracket
1966-69
426 HEMI
An excellent reproduction of the positive battery cable bracket located on the rear of the left cylinder head of 1966-...
Batterie Kabel Halter Positiv / Positive Battery Cable Routing Bracket
B-Body 1970-71
HEMI 426
Ausgezeichnete Nachbildung der positiven Batteriekabelhalterung, die sich am hi...
Auf Lager
This bracket holds the positive battery cable to the left frame rail on 1970-1974 E-Body and 1971-1974 B-Body cars. Made from stainless steel for longevity and appears as the o...
1963-1976 A-Body
Battery tray braces are manufactured to OEM specifications and dipped in corrosion resistant primer. Part includes correct J-nut and pointed mounting bolt for ...
1967-1969 B-Body
Battery tray braces are manufactured to OEM specifications and dipped in corrosion resistant primer. Kits include correct J-nuts and mounting bolts.
Komplettset für 383 & 400 Big Block Motoren der Baujahre 1969-1972 mit Klimaanlage.
Das Set umfasst das Lichtmaschinen-Montage-Dreieck, das geformte Einstellband, den Lichtmasc...
1971-74 E-Body
Rear axle brake hose bracket. Used to secure the brake hose to the body. Includes brake hose clip and correct 5/16-18 bolt.
Reference Chrysler part number 3466 ...
Rear axle brake hose bracket for 1971-74 B-Body applications. Used to secure the brake hose to the body. Includes brake hose clip and correct 5/16-18 bolt. Reference Chrysl...
Caliper Hardware Kit
This hardware kit is correct for servicing two Kelsey Hayes calipers used on 1970 B & E-Body vehicles. Kit includes all four disc brake housing locating ...
Caliper Hardware Kit
This hardware kit is correct for servicing two Kelsey Hayes calipers used on 1971 B & E-Body vehicles. Kit includes all four disc brake housing locating ...
Befestigungssatz für Scheibenbremssättel
für die frühen 1 Kolben Bremssättel mit Pin Type Aufhängung (1970–72)
optisch korrekt für 1972
Dieser Befestigungssatz ist für die Wa...
Excellent reproduction of the brackets used to secure the front disc brake hose to the caliper brake line tube on 1966-69 B-Body cars. Brackets are formed left and right and mo...
1971 340 ThermoQuad 4-Barrel Choke Assembly
Excellent reproduction of the long extinct 3512 875 choke assembly for 1971 340 Carter Thermoquad equipped cars. Has the correct pa...
Both the heat tube cover and piston housing cover are made to exacting standards, feature correct lettering, etched index mark, and are injection molded from ultra-high temperat...
1966-1970
426 Hemi Choke Housing Retainer Kit
Zinc dichromate housing retainer, stainless choke baffle plate, housing gasket, heat tube cover gasket, and correct mounting screw...
Excellent reproduction made to exacting standards, features correct lettering, and is injection molded from ultra-high temperature material. Replace that broken or missing part...
Accurate reproductions of the E-Body & 1971-72 B-Body wiring clips located on the brake pedal reinforcement bracket behind the master cylinder on all manual brake applications. ...
Hervorragende Reproduktion des Kabelclips, der sich an einem der oberen Befestigungsbolzen für die Ausgangswelle des Automatikgetriebes befindet.
Wird verwendet, um den Kabelba...
Excellent reproduction of the wiring clip found on the upper left bell housing-to-engine block attaching bolt for both manual and automatic transmission equipped cars. Used to ...
Wire retaining clip for the brake system indicator switch wire on 1967-76 A-Bodies. Mounts to left inner fender at rear of shock tower. Zinc plated correct gauge steel and the...
Wire retaining clip for the reverse light switch wire on 3 and 4-speed transmissions. Mounts under side cover retaining bolts at top rear and upper rear side locations. Zinc p...
1966-70 B-Body
An excellent reproduction of the LONG version of the wiring clip located on the brake pedal reinforcement bracket. Used on both power and standard brake applicat...
1966-70 B-Body
An excellent reproduction of the SHORT version of the wiring clip located on the brake pedal reinforcement bracket. Used on both power and standard brake applica...
Torque Converter Drain Cover Kit
An excellent reproduction of the torque converter drain cover
used on 1962-78 small block 727 automatic transmission applications.
Formed from...
1966-74 Big Block non-A/C alternator adjusting strap. POWDER COATED semi-gloss black.
1966-71 Hemi
Alternator adjusting strap. POWDER COATED semi-gloss black.
Reference Chrysler part number 2780 630
1967-68 Big Block with A/C alternator adjusting strap with heater hose shield. POWDER COATED semi-gloss black with the shield thermo-plastic coated. Use with #V2 hose bracket.
Quality reproduction to be used on original cars or with a reproduction hood. Pair of brackets comes welded and dipped in red oxide primer, ready for paint.
Eine exzellente Nachbildung der Schalthebelsteuerungseinheit, die bei B-Body-Fahrzeugen der Baujahre 1967-69 mit Mittelkonsole und Automatikgetriebe verwendet wurde.
Das Set um...
Eine exzellente Nachbildung des Gangschaltungs-Sets, das bei B-Body-Fahrzeugen des Baujahres 1970 mit Mittelkonsole und Automatikgetriebe verwendet wurde.
Das Set umfasst die g...
An excellent reproduction of the gearshift control assembly used on console shifted 1970 E-Body cars with automatic transmission. The assembly includes the gearshift control tor...
Eine exzellente Nachbildung des Gangschaltungs-Sets, das bei B- und E-Body-Fahrzeugen der Baujahre 1971-74 mit Mittelkonsole und Automatikgetriebe verwendet wurde. Wenn Ihr Fahr...
Gas-Rückstell- und Kick-Down-Feder Set
Throttle & Automatic Kick-down Return Springs
Correct 22 coil green with blue stripe front and 18 coil red with white stripe rear throttl...
Auf Lager
Gas-Rückstellfeder
Throttle Return Spring
Correct 33 coil violet 1971 340 4-barrel throttle return spring. Painted violet metallic as original.
Reference P/N 3462 735
1971 34...
Auf Lager
1964-1966 Big Block for both A/C and Non-A/C Applications
1967-73 318 & 360 2-Barrel Applications
Reference Chrysler part number 2806 465.
1971-73 340 & 360 4-Barrel Applications. Used through April 1973.
Reference Chrysler part number 3462 736
1970 340 Six Pack Applications
Reference Chrysler part number 3577 508
1966-1971 426 Hemi Dual 4-Barrel Applications
Reference Chrysler part numbers 2780 586 and 2780 587
1967-68 Big Block 4-barrel with A/C Applications
Reference Chrysler part number 2806 452.
1969-74 Big Block 4-barrel with A/C Applications
Bolts to rear A/C compressor bracket with 1/4-20 hex head bolt. Zinc plated as original.
Reference Chrysler part number 3899 962
340 Six Pack Throttle Cable Mounting Bracket complete with zinc plated hold down and correct hex coni keps nut.
Use for both 4-speed and automatic transmission applications.
R...
Auf Lager
1971 440 Six Pack Throttle Cable Mounting Bracket complete with zinc plated hold down and correct hex coni keps nut.
Use for both 4-speed and automatic transmission application...
1966-71 426 Hemi
Throttle Cable Mounting Bracket complete with zinc plated hold down and correct hex coni keps nut.
Use for both 4-speed and automatic transmission application...
1971 B, C and E-Body 383 Four-Barrel
Throttle Cable Mounting Bracket complete with zinc plated hold down and correct hex coni keps nut. Used on B, C, and E-Body applications.
...
1971-72 440 Four-Barrel B-Body
1970 440 C-Body
Throttle Cable Mounting Bracket complete with zinc plated hold down and correct hex coni keps nut. Use for both 4-speed and autom...
1972-73 340 Four-Barrel
1974 360 Four-Barrel
Throttle Cable Mounting Bracket complete with zinc plated hold down and correct hex coni keps nut. Used on B & E-Body applications...
Getriebe-Umlenkhebel-Baugruppe
Hervorragende Reproduktion der Automatikgetriebe Kick-Down-Gestänge Umlenkhebel Baugruppe auf alle 1968-70 Big Block B & E-Body-Anwendungen verwe...
Lichtmaschinen Halter Big Block Mopar mit Klima
1967-1968 alle B/RB Motoren mit Klima
Alternator Mounting Bracket BBM 1967-78 w/ A/C
Lichmaschinen Halter
Alternator Bracket
Fits all big block water pumps. Has correct locating dimple and 5/16-18 weld nut for heater hose shield #0058. POWDER COATED low gloss ...
Lichtmaschinen Halter nur für BBM und Hemi ohne Klima
Alternator Bracket BBM Triangle Only BBM/Hemi without A/C
Fits water pumps with casting numbers 2780 987 & 3698 468. POWD...
Lichtmaschinen Halter für BBM und Hemi vor 1967 ohne Klima
Alternator Bracket BBM Triangle Only Big Block non-A/C Pre-67
big block & Hemi engine without A/C. Alternator mountin...
Halter für Schaltgestänge 68-77 A-Body A727
An excellent reproduction of the gearshift control torque shaft transmission bracket used on 1968-74 A-Body column shifted cars with...
Eine exzellente Nachbildung der Halterung für die Schalthebelsteuerungs-Drehmomentwelle, die bei B-Body-Fahrzeugen der Baujahre 1966-70 mit Lenksäulenschaltung und 727-Automatik...
Lichtmaschinen Halter Kit für 426 Hemi
Alternator Mounting Kit for 426 Hemi
Fits water pumps with casting numbers 2205 862, 2468 007, & 2536 767. POWDER COATED low gloss black...
Auf Lager
Lichtmaschinen Halter Kit Big Block Mopar mit Klima
1967-1968 alle B/RB Motoren mit Klima
Alternator Bracket and Bolt Kit BBM with A/C
Comes complete with cast alternator mou...
Halter-Kit für das Wasserregelventil
Exakte Nachfertigung des Halters, wie bei allen E-Body und 1971–72 B-Body-Modellen mit Klimaanlage verbaut.
Gefertigt aus korrektem Materia...
Halterungssatz Lichtmaschinenregler 1970 B-Body
Exakte Nachfertigung der originalen Halterung für den elektronischen Lichtmaschinenregler bei allen 1970er B-Body-Fahrzeugen.
Gef...
Haltescheiben-Satz für Zugstrebenbuchsen – Mopar A-Body 1963–1972
Nachgefertigter Satz Zugstrebenbuchsen-Haltescheiben für Chrysler/Mopar A-Body-Modelle der Jahre 1963 bis 1972...
Nachgefertigter Satz Zugstrebenbuchsen-Haltescheiben für Mopar B-Body-Modelle (1966–1972) und E-Body-Modelle (1970–1974). Gestanzt aus originaler Materialstärke und detailgetreu...
Schöne Nachbildung der Klemme, die zur Befestigung des oberen Feststellbremskabels am Handbremshebel für 1966-70 B-Body, 1970 E-Body und1970-75 A-Body verwendet wurde.
Mit der k...
1971 B & E-Body
Correct parking brake cable front-to-intermediate connector. Made from correct gauge material and hot dip galvanized like original.
Reference Chrysler part n...
1970-74 E-Body
An excellent reproduction of the outer heater core housing for non-Air Conditioned applications. The original parts are commonly broken near the lower vent open...
1970 & Later Small Block
Bolts to right cylinder head. Made of correct gauge galvanized steel & thermo-plastic coated for original appearance.riginal appearance.
Hemi Choke Wärmerohr Clip Paket
Hervorragende Reproduktionen der Vergaser-Choke-Heizungsrohr-Befestigungsclips, die bei 1966-70 426 Hemi-Anwendungen verwendet wurden.
Sie befi...
Dieses originalgetreu nachgefertigte Hitzeschutzblech passt bei 340-Motoren der Baujahre 1970–72 sowie bei 360-Motoren von 1971–72. Es wird unter der Ansaugspinne montiert und s...
Dieses hochwertige Repro-Hitzeschutzblech entspricht dem Originalteil, das sich an der Unterseite des Ansaugkrümmers von 340-Motoren der Baujahre 1968–69 befindet. Es verhindert...
Hitzeschutzblech Ansaugspinne
Passgenaue Reproduktion des Hitzeschutzblechs, das an der Unterseite der Ansaugspinne des 426 Hemi montiert ist. Das Blech schützt die Ansaugspinn...
Correct length screws (4 long & 8 short) in the zinc dichromate finish as original. Includes 12 gaskets. New Holley carbs have hex head screws so replace them with correct style...
This quality reproduction horn pad retainer kit is cut from the correct gauge steel and zinc phosphate and oiled to prevent corrosion. Includes three 8-32 zinc plated mounting ...
Hupenknopf Road Runner
Horn Pad Road Runner Center Emblem
Correct injection molded part with proper silver border and premium Road Runner decal installed. The finishing touch f...
Kennzeichenhalter vorne
Front License Plate Bracket
Very nice reproduction of the front license plate mounting bracket used on 1972-1974 Challenger & 1973-74 Barracuda. Made f...
Hervorragende Reproduktion des 727 Automatikgetriebe-Drosselklappenhebels, der bei Fahrzeugen von 1969-79 mit dem Einstangen-Kickdown verwendet wurde. Geformt aus der richtigen ...
Auf Lager
An excellent reproduction of the automatic transmission kickdown rod connector used on all 1965-66 B and C-Body applications, as well as all 1966-71 426 hemi applications. Fabri...
Reproduktion des originalen Klimaanlagen-Datenschilds, das am Klimakompressor befestigt wird. Ersetzen Sie den fehlenden Originalaufkleber mit dieser hochwertigen Nachbildung. M...
Klimakompressor Typenschild
Data Tag for RV-2 Compressor A/C
Air Conditioning data tag for RV-2 compressor shows correct charge capacity and refrigerant type. For use on 1967-7...
Klimakompressor Typenschild
Data Tag for RV-2 Compressor A/C
Air Conditioning data tag for RV-2 compressor shows correct charge capacity and refrigerant type. For use on 1966-...
Trunk Lock Latch Link / Kofferraumschloss Gestänge
70-71 Barracuda
This high quality reproduction deck lid latch release link is accurately formed from correct gauge material ...
Trunk Lock Latch Link / Kofferraumschloss Gestänge
72-74 Barracuda
Hochwertige Nachbildung des Kofferraumdeckel-Verschluss-Entriegelungshebels, präzise aus dem richtigen Mater...
Trunk Lock Latch Link Lever Kit / Hardware Kit
Exzellente Nachbildungen der Kofferraumdeckel-Verschluss- und Schlosszylinder-Verbindungshebel für 1970-74 Barracuda/'Cuda.
Das ...
Artikel 201 - 300 von 391
