Product Description
ELASKON K 60 ML is a long-term corrosion protection agent for metallic surfaces (small metal parts) and vehicle cavity preservation.
For general vehicle cavity preservation, we use longer-lasting greases like Mike Sanders or Fluid Film. However, in areas where grease may drip due to later sun exposure (e.g., hood, trunk lid, headliner), this handy spray can is preferred. It dries to a dust-free surface, preventing dirt accumulation.
Attention: Hazardous material – no express shipping or air freight.
Features:
Properties:
ELASKON K 60 ML contains a solvent. After evaporation, it forms a thin, durable film. It is low-viscosity for easy application and provides reliable corrosion protection when used correctly.
Storage:
Store in the original sealed container at max. 30°C.
Application:
Apply by spraying, dipping, or brushing onto clean metal surfaces. Recommended application temperature:
Technical Data:
-
Density (15°C): 0.86 g/cm³
-
Flash point: ~40°C
-
Viscosity (ASTM D7042, 25°C): >40 s
-
Solid content: 50%
-
Salt spray test: Passed (DIN 50021, SS)
-
Application rate: 285 g/m²
-
Penetration (solid mass): 50 (1/10 mm)
-
Break point (-30°C, solid mass): DIN EN 12593
-
Drip point (>80°C, solid mass): DIN 51801
-
Dry film thickness: 80-100 μm
-
Aromatic content in solvent: < 0.1%
All raw materials and finished products undergo strict quality controls. The information provided reflects current knowledge and typical applications but does not guarantee specific properties or suitability. Users must comply with applicable regulations. Our general terms and conditions apply.
