Seat Belt and Harness Hardware
Items 1 - 15 of 15
Item No.:
MOP-SB7
Front Shoulder Harness Mounting Cover 1967-70 A- & B-Body, 1970-74 E-Body
Item No.:
SBS-HW12
3-Point Seat Belt Hardware Kit
Mounting and hardware kit for 3-point seat belts.
Includes:
2× 90-degree short brackets
2× 7/16"-20 × 1.5" bolts
2× 7/16"-20 × 1" bolts
2× 2.5" ...
Item No.:
CHASBB671
Seat belt bolt kit, suitable for 1967–1971 Mopar A-Body models:
Dart, Duster, Barracuda, Demon, Scamp.
Includes 10 new bolts for complete installation of seat belt systems.
Item No.:
CHBSBB687
Schraubensatz für die Sicherheitsgurte
1968 1969 1970 Charger, Coronet, GTX, Road Runner, Belvedere, Satellite, Daytona, Superbird, Super Bee
set of 10 new reproduction seat bel...
Item No.:
CHESBB701
Seat belt bolt kit, suitable for 1970–1971 Mopar E-Body models:
Challenger, Cuda, Barracuda.
Includes 10 bolts for complete installation of seat belt systems.
Item No.:
CHZSBLTSPC
Seat belt bolt spacers and washers – for use between seat belts at the center seat position, front or rear.
1/2″ I.D. spacers are 5/16″ thick.
Used to properly space and secure ...
Item No.:
BOLT-C10
Seat belt retractor bolt, suitable for GM A- and B-Body models from 1968 to 1970.
Features 5/8" thread length, 5/8" shoulder, and 7/16"-20 fine thread. Designed for secure mount...
Item No.:
BOLT-C01
Seat belt retractor bolt, suitable for Mopar E-Body models from 1970–1971.
Features 1 1/4″ thread length, no shoulder, and 7/16"-20 fine thread.
Designed for secure mounting of ...
Item No.:
BOLT-C12
Seat belt receiver bolt, suitable for Mopar A/B/E-Body models.
Features 7/8″ thread length, 7/8″ shoulder, and 7/16"-20 fine thread.
Designed for secure mounting of the seat bel...
Item No.:
BOLT-C11
Seat belt bolt, suitable for Mopar A/B/E-Body models.
Features 5/8″ thread length, 3/8″ shoulder, and 7/16"-20 fine thread.
Designed for securing seat belt components – verify c...
Item No.:
MsPro-23-SBB-001
Seat Belt Eye Bolt
Floor Mount, Steel, Eyebolts, Nuts, Each
Brand: MsPro
Product Line: MsPro Restraint Mounting Kits
Part Type: Seat Belt Fasteners
Belt thread: 7/16x20-UNF
H...
Item No.:
MOP-SB2W
w/ Screws 68-69 A- & B-Body with front buckets some 70 Beispielbild
Item No.:
CHZINTSB6
Seat belt end covers for 1967–1970 Mopar A & B-Body models.
These rubber covers conceal the mounting bolts on the floor by the driveshaft tunnel – used on both bucket and bench ...
Item No.:
SBS-HW1
Sicherheitsgurt-Installationssatz
Item No.:
MsPro-23-BRK-001
Steel reinforcement plate with nut
Floor Mount, Steel, Plate, Nut, Each
Brand: MsPro
Product Line: MsPro Restraint Mounting Kits
Part Type: Steel reinforcement plate with nut...
Items 1 - 15 of 15
