Bundmutter für Schaltgestänge. Pro Fahrzeug werden 3 Muttern benötigt. Correct flange nut for attatching shifter operating levers to transmission gearshift lever studs. Three p...

2,09 €

incl. 19% VAT plus shipping costs

Net: 1,76 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Clutch Z-Bar Linkage Wear Washer

Hoffman's Winners Circle

Item No.:

MOP-086

Delivery time: ca. 5 weeks (DE - int. shipments may differ)

Wear washer that fits over the pivot stud of each end of the Z-Bar, and the clutch pedal linkage stud. Prevents friction between the clutch actuator rods and the Z-Bar. Refere...

Manufacturer according to GPSR
Hoffman's Winners Circle

2,28 €

incl. 19% VAT plus shipping costs

Net: 1,92 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Snap ring for all A833 overdrive transmission

Item No.:

SR-OD

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Sprengring für alle A833 Overdrive-Getriebe, hält die 3-4 Synchronisierung auf der Vorderseite der Hauptwelle. Snap ring for all A833 overdrive transmissions, retains the 3-4...

2,51 €

incl. 19% VAT plus shipping costs

Net: 2,11 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Backing Plate Gasket 8.75_ white foam

Sealed Power

Item No.:

R13800

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Dichtung zwischen Radlagerhalteplatte und Halteplatte der Trommelbremse Gasket Axel/Backing Plate 8.75 Chrysler 8.75 in. Dana 60 9.75 in. Brand: Fel-Pro Part Type: Axle Drive...

Manufacturer according to GPSR
Sealed Power

3,01 €

incl. 19% VAT plus shipping costs

Net: 2,53 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Nut Torque Shaft Frame Ball Stud A833

Item No.:

BSN

Delivery time: ca. 4 weeks (DE - int. shipments may differ)

Drehmomentwellen-Kugelzapfen-Mutter 9/16 x 12. Pro Fahrzeug wird eine benötigt. Torque shaft frame ball stud nut. 9/16 x 12 thread, one per car.

3,09 €

incl. 19% VAT plus shipping costs

Net: 2,60 €

Quantity: Set(s)

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Transmission Bell Crank Hairpin & Washer

Hoffman's Winners Circle

Item No.:

MOP-7983

Delivery time: ca. 5 weeks (DE - int. shipments may differ)

Transmission Bell Crank Exact replacements of the hairpin and flat washer used on throttle cable bracket pivot pins to secure the automatic transmission kick-down linkage bell ...

Manufacturer according to GPSR
Hoffman's Winners Circle

3,43 €

incl. 19% VAT plus shipping costs

Net: 2,88 €

Quantity: Set(s)

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Clutch Fork Rod Adjusting Nut

Hoffman's Winners Circle

Item No.:

MOP-979

Delivery time: ca. 5 weeks (DE - int. shipments may differ)

Special purpose nut used to lock the position of the clutch fork rod washer and insulator. Zinc and wax finished for the proper appearance. One required per car. Reference Ch...

Manufacturer according to GPSR
Hoffman's Winners Circle

3,43 €

incl. 19% VAT plus shipping costs

Net: 2,88 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

O-Ring Transmission Oil Dipstick A727 & A904 1962-78

Item No.:

MsPro-21-OR-Dip

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

O-Ring für Öleinfüllrohr / Ölpeilstabrohr Getriebe Transmission dipstick tube O-ring for 1962-78 models with A/T.

3,50 €

incl. 19% VAT plus shipping costs

Net: 2,94 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Input Shaft Roller Retainer

Item No.:

SP-294I-R

Delivery time: ca. 4 weeks (DE - int. shipments may differ)

Haltering für Eingangswellenwalzen Für alle A833 Getriebe. Input shaft roller retention ring for all A833 transmissions.

3,51 €

incl. 19% VAT plus shipping costs

Net: 2,95 €

Quantity: Set(s)

Ich bin völlig damit einverstanden, nichts zu erhalten*.

O-Ring Speedometer Gear Housing A904, A727, A833 1966-78 and more

Item No.:

MsPro-21-OR-Speedo

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

O-Ring für Speedometer Gear Housing Dies ist der große O-Ring der außen auf dem Ritzelträger montiert ist. Außendurchmesser grob 45mm. Der kleine Dichtring ist nicht einzeln er...

3,90 €

incl. 19% VAT plus shipping costs

Net: 3,28 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Clutch Linkage Washer _anti-squeek_

Item No.:

CLW086

Delivery time: ca. 4 weeks (DE - int. shipments may differ)

Unterlegscheibe zum Verhindern von Quietschgeräuschen. Pro Fahrzeug werden 3 Scheiben benötigt. Clutch linkage in.anti-squeekin. washer, goes on clutch linkage pins on clutch p...

3,92 €

incl. 19% VAT plus shipping costs

Net: 3,29 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Seal, A904 Output Shaft

Transtar

Item No.:

TST-12074E

Delivery time: 5 - 7 Workdays (DE - int. shipments may differ)

Getriebe-Simmerring A-904 60,3mm außen für 39,7mm yoke ***Bild entspricht nicht dem Original***

Manufacturer according to GPSR
Transtar

3,94 €

incl. 19% VAT plus shipping costs

Net: 3,32 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Clip A833 Shifter Linkage

Item No.:

CL015

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Federstahldrahtklammer 6 Stück pro Fahrzeug benötigt. Auch als Kit zusammen mit Unterlegscheiben als CL/WA erhältlich. Shifter linkage clip, sold each, 6 required per car. For ...

4,17 €

incl. 19% VAT plus shipping costs

Net: 3,50 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Plug for Clutch Rod Hole in the Firewall, 1966-74 A-/B-/E-Body

Item No.:

CHR6725676

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Firewall plug for clutch linkage on A,B and E-body models. Clutch Rod Oval Firewall plug Plastic oval shaped plug designed to cover the hole in the firewall intended for clutch...

4,46 €

incl. 19% VAT plus shipping costs

Net: 3,74 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Clip Clutch Z-Bar Linkage Spring

Hoffman's Winners Circle

Item No.:

MOP-085

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Spring steel clip that fits over the pivot stud of each end of the Z-Bar, and the clutch pedal linkage stud. Secures the clutch actuator rods to the Z-Bar and clutch pedal link...

Manufacturer according to GPSR
Hoffman's Winners Circle

4,57 €

incl. 19% VAT plus shipping costs

Net: 3,84 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Simmerring

National Seal

Item No.:

NAT-8705NLA

Seal, Front Inner Wheel Bearing Quantity: Sold individually. Notes: Front inner seal. Do you want a better sealing surface? Wheel seals offer consistent, leak-proof performanc...

4,73 €

incl. 19% VAT plus shipping costs

Net: 3,98 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Go to item

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Seal, A727 & A904 Shifting Shaft 1966-94

Transtar

Item No.:

TST-22072

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Simmering A-727/A-904 Schaltwelle, 1/4in. Höhe

Manufacturer according to GPSR
Transtar

4,99 €

incl. 19% VAT plus shipping costs

Net: 4,19 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Seal, Torque Converter A904

Transtar

Item No.:

TST-12070

Delivery time: 5 - 7 Workdays (DE - int. shipments may differ)

Simmering A-904 Front Pump/Convertor

Manufacturer according to GPSR
Transtar

5,07 €

incl. 19% VAT plus shipping costs

Net: 4,26 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Seal, Wheel Grease, 7 1/4 in. & 8 1/4 in.

National Seal

Item No.:

N8660S

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Simmering, Ausgangswelle Simmerring 7 1/4in. Steckachse // 8 1/4 1969-70 Dieser Wellendichtring wurde hauptsächlich 1969-70 verwendet, aber teilweise auch in späteren Baujahre...

Manufacturer according to GPSR
National Seal

5,36 €

incl. 19% VAT plus shipping costs

Net: 4,50 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Backing Plate Gasket 8.75_ steele shim

Sealed Power

Item No.:

R55032

Delivery time: 4 - 5 weeks (DE - int. shipments may differ)

Dichtung zwischen Hinterachsgehäuse und Halteplatte der Trommelbremse Gasket Axel/Backing Plate 8.75 Chrysler 8.75 in. Dana 60 9.75 in. Brand: Fel-Pro Part Type: Axle Drive F...

Manufacturer according to GPSR
Sealed Power

5,65 €

incl. 19% VAT plus shipping costs

Net: 4,75 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Clutch Pedal Up-stop Bump, 62-74 B-Body

Item No.:

MOP-FD6820

Delivery time: ca. 7 weeks (DE - int. shipments may differ)

Clutch Pedal Stop Bumper fits for: 62-74 B-Body

5,66 €

incl. 19% VAT plus shipping costs

Net: 4,76 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Clutch Bell Crank Ball Stud Nylon Bearing (Pair of two halves)

Hoffman's Winners Circle

Item No.:

MOP-938

Delivery time: ca. 5 weeks (DE - int. shipments may differ)

Injection molded in Delrin to increase life and reduce friction, yet provides correct appearance of nylon. Each pair fits over the Z-Bar ball studs and into the Z-Bar tube. 2 p...

Manufacturer according to GPSR
Hoffman's Winners Circle

5,71 €

incl. 19% VAT plus shipping costs

Net: 4,80 €

Quantity: Pair

Ich bin völlig damit einverstanden, nichts zu erhalten*.

A833 Synchronizer Snap Ring

Item No.:

SR-131

Delivery time: ca. 4 weeks (DE - int. shipments may differ)

Synchron-Sicherungsring Sichert die Teile auf der Hauptwelle. Synchronizer snap ring Locks assembly on the main shaft. Two per transmission, sold each.

5,93 €

incl. 19% VAT plus shipping costs

Net: 4,98 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Clutch Rod Boot

Item No.:

MOP-K-6783

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Clutch Firewall Push Rod Boot Aftermarket Version that Fits all Models Clutch pushrod boot-Seals the clutch pedal pushrod to the firewall.

6,06 €

incl. 19% VAT plus shipping costs

Net: 5,09 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Clip Clutch Z-Bar Linkage Spring

Item No.:

CLC085

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Klammer für Kupplungsgestänge Es werden drei Klammern pro Fahrzeug benötigt. Passt an allen Modellen mit Schaltgetriebe. Clutch Linkage Clip Clutch linkage clip, attatches clu...

6,26 €

incl. 19% VAT plus shipping costs

Net: 5,26 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Bearing Front Pump A904 & A500

Transtar

Item No.:

TST-12034

Delivery time: 5 - 7 Workdays (DE - int. shipments may differ)

Gleitlager A-904 und A-500 Front Pump/Wandler Material: Babbit 1960-und alle aufwärts

Manufacturer according to GPSR
Transtar

6,35 €

incl. 19% VAT plus shipping costs

Net: 5,34 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Seal, Wheel Grease, 8 1/4_ & 9 1/4_ Axle Shafts

National Seal

Item No.:

N8835S

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

outer seal 8 1/4in. & 9 1/4in. rear axle 1971 - 76 Dieser Wellendichtring wurde hauptsächlich bei der 8 1/4in. hauptsächlich 1971 und folgende verwendet, aber teilweise auch in...

Manufacturer according to GPSR
National Seal

6,64 €

incl. 19% VAT plus shipping costs

Net: 5,58 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Clutch Z-Bar Ball Stud Rubber Seal

Hoffman's Winners Circle

Item No.:

MOP-942

Delivery time: ca. 5 weeks (DE - int. shipments may differ)

Injection molded in silicone rubber for higher temperature resistance and long life. in.BALL SIDEin. lettering shows which direction the seal is to be installed. Keeps dirt ou...

Manufacturer according to GPSR
Hoffman's Winners Circle

6,85 €

incl. 19% VAT plus shipping costs

Net: 5,76 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Seal, A904 Output Shaft

Transtar

Item No.:

TST-12074J

Delivery time: 5 - 7 Workdays (DE - int. shipments may differ)

Getriebe-Simmerring A-904 4WD 60,3mm außen für 39,7mm yoke ***Bild entspricht nicht dem Original***

Manufacturer according to GPSR
Transtar

7,32 €

incl. 19% VAT plus shipping costs

Net: 6,15 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Dowel Pin 0,000_ offset

Hughes Engines

Item No.:

HUG-7508

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Führungszapfen für das Getriebe Cylinder Block To Transmission Bellhousing, Fits SB & BB High quality hardened dowel pin. Precision Ground Dowel Pins Type: Dowel Pin Diameter:...

Manufacturer according to GPSR
Hughes Engines

7,50 €

incl. 19% VAT plus shipping costs

Net: 6,30 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Dipstick Tube Grommet (RWD) 5/8 in.

Hughes Performance

Item No.:

HUP-44141

Delivery time: 2 - 3 weeks (DE - int. shipments may differ)

Hughes Performance Dipstick Tube Grommet The Hughes dipstick tube grommet provides a tight seal between the dipstick tube and the transmission to help prevent fluid leaks and k...

Manufacturer according to GPSR
Hughes Performance

7,50 €

incl. 19% VAT plus shipping costs

Net: 6,30 €

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Seal, A833 Input Shaft 23 spline

National Seal

Item No.:

N9376

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Simmering, Antriebswelle A-833 Seal Inputshaft 23 spline Oil Seal / Nitrile / Shaft Size=1.055in. Housing Bore=1.5in. Outer Diameter=1.504in. Width=0.268in. CHRYSLER (1961...

Manufacturer according to GPSR
National Seal

7,57 €

incl. 19% VAT plus shipping costs

Net: 6,36 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Drive Pinion Bearing, 0.088_

Item No.:

MOP-FD8211

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

inner and/or mainshaft output bearing snap ring, .088in. thick, fits all 1964-1974 transmissions

7,79 €

incl. 19% VAT plus shipping costs

Net: 6,55 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Drive Pinion Bearing, 0.091_

Item No.:

MOP-FD8212

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

inner and/or mainshaft output bearing snap ring, .091in. thick, fits all 1964-1974 transmissions

7,79 €

incl. 19% VAT plus shipping costs

Net: 6,55 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Drive Pinion Bearing, 0.094_

Item No.:

MOP-FD8213

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

inner and/or mainshaft output bearing snap ring, .094in. thick, fits all 1964-1974 transmissions

7,79 €

incl. 19% VAT plus shipping costs

Net: 6,55 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Drive Pinion Bearing, 0.097_

Item No.:

MOP-FD8214

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

inner and/or mainshaft output bearing snap ring, .097in. thick, fits all 1964-1974 transmissions

7,79 €

incl. 19% VAT plus shipping costs

Net: 6,55 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Clutch Z-Bar Ball Stud Bearing Retaining Wire

Hoffman's Winners Circle

Item No.:

MOP-910

Delivery time: ca. 5 weeks (DE - int. shipments may differ)

Spring steel wire that secures the frame side ball stud bearings in the Z-Bar tube. Clips over the Z-Bar tube and ends insert into holes on tube and into locking groove of bear...

Manufacturer according to GPSR
Hoffman's Winners Circle

8,00 €

incl. 19% VAT plus shipping costs

Net: 6,72 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Clutch Fork Rod Return Spring for Big Block & small Block

Hoffman's Winners Circle

Item No.:

MOP-705

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

all 1966 and later Big Block B & E-Body Small Block Heavy duty spring used to keep tension between the clutch fork and adjusting rod. 1 required per car. Reference Chrysler p...

Manufacturer according to GPSR
Hoffman's Winners Circle

8,00 €

incl. 19% VAT plus shipping costs

Net: 6,72 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Clutch Fork Rod Return Spring, Small Block A-Body

Hoffman's Winners Circle

Item No.:

MOP-480

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

A-Body and 1962-65 Big Block B-Body Heavy duty spring used to keep tension between the clutch fork and adjusting rod. 1 required per car Reference Chrysler part number 246...

Manufacturer according to GPSR
Hoffman's Winners Circle

8,00 €

incl. 19% VAT plus shipping costs

Net: 6,72 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Seal, Wheel Grease, 8 3/4in. & 7 1/4in. outer 1962-64

National Seal

Item No.:

N8133S

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Simmering, Radlager hinten, außen Oil Seal / Nitrile / Shaft Size=1.362in. Housing Bore=2.191in. Outer Diameter=2.195in. Width=0.25in. discontinued CHRYSLER 300 ...

Manufacturer according to GPSR
National Seal

8,00 €

incl. 19% VAT plus shipping costs

Net: 6,72 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Seal, Wheel Grease, 8 3/4_ inner, 1957-64, w/posi trac

National Seal

Item No.:

N470487N

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Simmering, Wellechdichtring Hinterachse 8 3/4in. Position: beim Radlager Dichtring innen 1957-64 Dodge, Plymouth, Chrysler für alle Fahrzeuge mit den dickeren Steckachsen, wie ...

Manufacturer according to GPSR
National Seal

8,03 €

incl. 19% VAT plus shipping costs

Net: 6,75 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

U-Joint Strap & Bolt Pkg. 1350

Moog Chassis Parts

Item No.:

LMG33010

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Halterungen für das hintere Kreuzgelenk an der Hinterachse passend für die 1350 Kreuzgelenkversion an 8 3/4in. & Dana 60 Hinterachsen U-Joint Girdles, Steel, Black Anodized, 1...

Manufacturer according to GPSR
Moog Chassis Parts

8,18 €

incl. 19% VAT plus shipping costs

Net: 6,87 €

Quantity: Pair

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Shifter Button Spring, 69-70 B-Body, 70 E-Body, 69-74 A-Body

Item No.:

MOP-713S

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Schaltknüppelfeder Shifter Button Spring, automatic 1969-70 B-Body, 1970 E-Body,1969-74 A-Body

8,25 €

incl. 19% VAT plus shipping costs

Net: 6,93 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Pinion Nut Chrysler 7 1/4in., 8 1/4in., 8 3/4in., 9 1/4in.

Ratech

Item No.:

RAT-1501

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Mutter für das Kegelrad (Pinion) der Hinterachse. Sie hält auch den Pinion Yoke in Position. 7/8_ -14 UNF Feingewinde Schlüßelweite 32mm Selbstsichernd Pinion Nut, Steel, GM/Mo...

Manufacturer according to GPSR
Ratech

8,30 €

incl. 19% VAT plus shipping costs

Net: 6,97 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Rear Axle Vent universal w/ 1/8_ NPT Thread

Currie Enterprises

Item No.:

CUR-95065NLA

Entlüfter für Hinterachsen Getriebe Rear-axle vent located on axle housing. Universalversion mit 1/8_ NPT Gewinde NICHT passend für originale Mopar Hinterachsen!

8,32 €

incl. 19% VAT plus shipping costs

Net: 6,99 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Go to item

Ich bin völlig damit einverstanden, nichts zu erhalten*.

A727 Steele Plates Direct & Forward Standard Steel Std. (.068_)

Item No.:

AAA-22594

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Stahlscheiben die zwischen den Kupplungsscheiben in der vorderen und hinteren Trommel liegen. Dicke: 0,068_ std original Material: std Stahl 727 Direct and Forward Steel Standa...

8,41 €

incl. 19% VAT plus shipping costs

Net: 7,07 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Seal, Wheel Grease, front 1973up

National Seal

Item No.:

N5121

Delivery time: 4 - 5 weeks (DE - int. shipments may differ)

Simmering Radlager vorne innen ab 1973 aufwärts CHRYSLER (1973 - 1989) DODGE (1972 - 1989) PLYMOUTH (1973 - 1989) Shaft (Inch): 1.940 Shaft (mm): 49.280 Housin...

Manufacturer according to GPSR
National Seal

8,50 €

incl. 19% VAT plus shipping costs

Net: 7,14 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Seal, A727 & A904 Shifting Shaft 1966-94, heavy duty version

Transtar

Item No.:

TST-22072A

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Simmering A-727/A-904 Schaltwelle, 3/8in. Höhe Dieser Simmering passt bei allen 1966 aufwärts gebauten Automatikgetrieben. Er passt nicht bei allen Pushbutton (Seilzuggeschaltet...

Manufacturer according to GPSR
Transtar

8,50 €

incl. 19% VAT plus shipping costs

Net: 7,14 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Thrust Washer Kit A904 68-74

Transtar

Item No.:

TST-12200C

Delivery time: 5 - 7 Workdays (DE - int. shipments may differ)

Anlaufscheibensatz für A904 Getriebe 68-74

Manufacturer according to GPSR
Transtar

8,66 €

incl. 19% VAT plus shipping costs

Net: 7,28 €

Quantity: Set(s)

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Pinion Nut Chrysler 8 3/4_

Ratech

Item No.:

RAT-1500

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Mutter für das Kegelrad (Pinion) der Hinterachse. Sie hält auch den Pinion Yoke in Position. 3/4_ UNF Gewinde (Feingewinde) Schlüßelweite der Mutter 28mm Pinion Nut, Steel, Dan...

Manufacturer according to GPSR
Ratech

8,70 €

incl. 19% VAT plus shipping costs

Net: 7,31 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Main Bearing Snap Ring Kit, 4 PCS, assorted

Item No.:

SRP

Delivery time: ca. 4 weeks (DE - int. shipments may differ)

Sicherungsringe für Getriebe-Hauptlager Vier Stück in verschiedenen Stärken von .086in. bis .091in.. Main bearing snap ring assortment 4 pieces various thicknesses range from ....

8,95 €

incl. 19% VAT plus shipping costs

Net: 7,52 €

Quantity: Set(s)

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Bushing A904 Outputshaft 1966+

Transtar

Item No.:

TST-12066

Delivery time: 5 - 7 Workdays (DE - int. shipments may differ)

Gleitlager A-904 Outputshaft 1966 aufwärts

Manufacturer according to GPSR
Transtar

9,00 €

incl. 19% VAT plus shipping costs

Net: 7,56 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Clutch Fork Rod Insulator

Hoffman's Winners Circle

Item No.:

MOP-412

Delivery time: ca. 5 weeks (DE - int. shipments may differ)

Injection molded from high durometer urethane for increased service life & improved clutch pedal feel. Installs into clutch release fork. Reference Chrysler part number 2461 4...

Manufacturer according to GPSR
Hoffman's Winners Circle

9,14 €

incl. 19% VAT plus shipping costs

Net: 7,68 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Clip Speedometer Cable & Wing

Item No.:

MOP-1000092

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Clip Speedometer Cable & Wing Car Front Seals Diese Clip fehlt oft, er hält die Tachowelle an der oberen, inneren Kante des linken Vorderrahmens fest.

9,28 €

incl. 19% VAT plus shipping costs

Net: 7,80 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Transmission Pan Filter Extension Gasket A727 & A904 1962-66

A+A Transmission

Item No.:

AAA-12776FG-2

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Dichtung für den bei tieferen Ölwannen verbauten Adapter (Tieferlegungsatz) Hier die Version für 2 Ansauglöcher, wie er bei Getrieben von 1962-65 benötigt wird.

Manufacturer according to GPSR
A+A Transmission

9,32 €

incl. 19% VAT plus shipping costs

Net: 7,83 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Bushing Front Pump/ Convertor A727 & A518 Babbit (1962-Up)

Transtar

Item No.:

TST-22034

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Dies ist das Gleitlager das beim A-727 & A518 in der Front Pump ein gepresst ist. In dem Gleitlager wird der Wandler gelagert. Material/Ausführung: Babitt * Bronze bushings: ...

Manufacturer according to GPSR
Transtar

9,80 €

incl. 19% VAT plus shipping costs

Net: 8,24 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Gearshift Control Torque Shaft Bushing, 1967-74

Hoffman's Winners Circle

Item No.:

MOP-420

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Used on 1967-74 A, B, C, and E-Body applications with automatic transmission. Two bushings required for both column and floor shifted automatic transmission equipped cars. Als...

Manufacturer according to GPSR
Hoffman's Winners Circle

9,90 €

incl. 19% VAT plus shipping costs

Net: 8,32 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Seal, A727 & A904 Shifting Shaft 1966-94

Item No.:

ATP-TO15

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Shifting Shaft Seal A-727 A-904 Original Equipment (OE) Part Interchange CHRYSLER: 2466842, 3878447, 4505098 Name Selector Shaft Seal Width (in inches) 0.025 Outer Diameter (i...

10,10 €

incl. 19% VAT plus shipping costs

Net: 8,48 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Crush Sleeve, 8 1/4_ Axle

Ratech

Item No.:

RAT-3101

Delivery time: 2 - 3 weeks (DE - int. shipments may differ)

Brand: Ratech Manufacturer's Part Number: 3101 Part Type: Differential Crush Sleeves Product Line: Ratech Crush Sleeves Crush Sleeve Material: Steel Carrier Shims Included: No ...

Manufacturer according to GPSR
Ratech

10,30 €

incl. 19% VAT plus shipping costs

Net: 8,65 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Pinion Nut Dana 60 - 9 3/4_

Ratech

Item No.:

RAT-1505

Delivery time: 2 - 3 weeks (DE - int. shipments may differ)

Mutter für das Kegelrad (Pinion) der Hinterachse. Sie hält auch den Pinion Yoke in Position. Axle Model: Dana 44 Application Notes: Fits 1994 and later Jeep models. Axle Mode...

Manufacturer according to GPSR
Ratech

10,40 €

incl. 19% VAT plus shipping costs

Net: 8,74 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Linkage Swivel Bushing, A833, 0.330 ID

Item No.:

LSB-R

Delivery time: ca. 4 weeks (DE - int. shipments may differ)

Edelstahl Adapterhülse für Reverse-Schaltungsgelenk Ermöglicht die Verwendung von aftermarket Hurst-Shiftern mit OEM Schaltgestängestangen. Stainless steel reverse lever adapte...

10,45 €

incl. 19% VAT plus shipping costs

Net: 8,78 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Linkage Swivel Bushing, A833, 0.378 ID

Item No.:

LSB

Delivery time: ca. 4 weeks (DE - int. shipments may differ)

Edelstahl Adapterhülse für Schaltungsgelenk Ermöglicht die Verwendung von aftermarket Hurst-Shiftern mit OEM Schaltgestängestangen. Stainless steel linkage swivel adapter bushi...

10,45 €

incl. 19% VAT plus shipping costs

Net: 8,78 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

U-Joint Strap & Bolt Pkg. 1350 & 1415

Precision Universal Joint

Item No.:

U49210NLA

Nur noch Abverkauf! Kreuzgelenk Riemen und Bolzen U-Joint strap & bolt pkg. big type Universal Joint Style: 1350-1415 Quantity: Sold as a kit. U-Joint, Retaining Straps and...

10,52 €

incl. 19% VAT plus shipping costs

Net: 8,84 €

Quantity: Set(s)

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Go to item

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Filter Extension Bolt Kit 1.800_

A+A Transmission

Item No.:

AAA-22730D-FEBK

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

3 Schrauben (länger als original) die verwendet werden wenn man eine Tiefere Getriebeölwanne mit 1,8_ Filter Tieferlegung verbauen möchte.

Manufacturer according to GPSR
A+A Transmission

10,53 €

incl. 19% VAT plus shipping costs

Net: 8,85 €

Quantity: Set(s)

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Simmerring 8 3/4_

National Seal

Item No.:

NAT-13797NLA

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Simmerring 8 3/4in. Achswelle 1961

Manufacturer according to GPSR
National Seal

10,62 €

incl. 19% VAT plus shipping costs

Net: 8,93 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Seal, Output Shaft, 60-61 Torqueflite

National Seal

Item No.:

N330663

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

60-61 Torqueflite Shaft (inch) 1.375 Shaft (MM) 34.930 Housing Bore (inch) 1.874 Housing Bore (MM) 47.600 Outside Diameter (inch) 1.878 Outside Diameter (MM) 47.700 Width (...

Manufacturer according to GPSR
National Seal

10,64 €

incl. 19% VAT plus shipping costs

Net: 8,94 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Speedometer Cable Grommet Mopar many Applications

OE Parts

Item No.:

MOP-552

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Kabeldurchführung Ramcharger & Air Grabber Kabel (passend für grob 21-22mm große Löcher) Firewall -to-cable grommet, new Chrysler. 2216522 GROMMET FIRE WALL This grommet is us...

Manufacturer according to GPSR
OE Parts

10,70 €

incl. 19% VAT plus shipping costs

Net: 8,99 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Bearing Alternator 60-79 Drive End/Pulley Side

Brower Bearing

Item No.:

B203FF

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

60-79 31,41,50,60,65,78 Amp A full line of premium oil seals and bearings • Premium bearing design matches OEM specifications • Precision manufactured using premium steel grade...

Manufacturer according to GPSR
Brower Bearing

10,91 €

incl. 19% VAT plus shipping costs

Net: 9,17 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Tool, Clutch Alignment, 26-Spline

Centerforce

Item No.:

CTF-53026

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Clutch Alignment Tool, 1 1/8 in. Diameter, 26-Spline, Plastic, Black, Each 26 Zähne Verzahnung der Getriebeeingangswelle Input Spline Quantity: 26 Input Shaft Diameter: 1.125 i...

Manufacturer according to GPSR
Centerforce

11,06 €

incl. 19% VAT plus shipping costs

Net: 9,29 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Clutch Pedal Stop Bumper

Item No.:

MOP-CSB

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

11,27 €

incl. 19% VAT plus shipping costs

Net: 9,47 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Vent Valve universal with Hose Barb

Dorman

Item No.:

RNB-924-284

Delivery time: 4 - 6 Workdays (DE - int. shipments may differ)

Differential Vent Part Type: Differential Vents Product Line: Dorman Differential Vents UPC: 019495451792 Differential Vent Head Style: Round Differential Vent Material: Plasti...

Manufacturer according to GPSR
Dorman

11,30 €

incl. 19% VAT plus shipping costs

Net: 9,49 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Bearing cup, Pinion, Dana 60

Brower Bearing

Item No.:

BHM88510

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Manufacturer according to GPSR
Brower Bearing

11,94 €

incl. 19% VAT plus shipping costs

Net: 10,03 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Wheel Bearing front outer 1955-79 A-/B-/C-/E-Body Front

Brower Bearing

Item No.:

BA2

Delivery time: 4 - 5 weeks (DE - int. shipments may differ)

Vorderes äusseres Lager Front outer Bearing / Race Innendurchmesser: 19,05mm 1960-79 A-body 1955-79 B-body 1970-74 E-body 1955-72 C-body Inner Diameter 0.75 Outer D...

Manufacturer according to GPSR
Brower Bearing

11,97 €

incl. 19% VAT plus shipping costs

Net: 10,06 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Transmission Pan Gasket A904

Fel Pro Perfomance

Item No.:

RTOS18667

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Getriebe-Ölwannendichtung Transmission Pan Gasket Chrysler, Dodge, Plymouth: 30RH, 31RH, 32RH, 40RH, 40RE, 42RH, 44RE, Torqueflite A-500, A-904, A-998, A-999 Cellulose/Nitri...

Manufacturer according to GPSR
Fel Pro Perfomance

12,13 €

incl. 19% VAT plus shipping costs

Net: 10,19 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Differential Bearing Cup 8 3/4_ early

Brower Bearing

Item No.:

B25520

Delivery time: 4 - 5 weeks (DE - int. shipments may differ)

Difflager 8 3/4in. early ca. 45mm innen u.a.b. clutch type sure grip

Manufacturer according to GPSR
Brower Bearing

12,22 €

incl. 19% VAT plus shipping costs

Net: 10,27 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Transmission Pan Gasket A727

Fel Pro Perfomance

Item No.:

RTOS18583

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Getriebe-Ölwannendichtung Transmission Pan Gasket, Cellulose, Nitrile, A-727 Torqueflite, Each Dichtung ist Hi-Quality aus Papier mit Gummibeschichtung Brand: Fel-Pro Part Typ...

Manufacturer according to GPSR
Fel Pro Perfomance

12,44 €

incl. 19% VAT plus shipping costs

Net: 10,45 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Differential Bearing Cup 8 1/4 in.

Item No.:

TMK-LM102910

Delivery time: 2 - 3 weeks (DE - int. shipments may differ)

Lager Kappe, Differenzial 8 1/4in. LM102949/10 Single-row Taper Roller Wheel bearing, bearing ables to carry radial and axial load in one direction simultaneously, this is a po...

12,46 €

incl. 19% VAT plus shipping costs

Net: 10,47 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Clutch Fork Rod Conical Washer

Hoffman's Winners Circle

Item No.:

MOP-483

Delivery time: ca. 5 weeks (DE - int. shipments may differ)

Conical faced steel washer that backs the clutch fork insulator. Finished in zinc phosphate as original. 1 required per car Reference Chrysler part number 2461 483

Manufacturer according to GPSR
Hoffman's Winners Circle

12,57 €

incl. 19% VAT plus shipping costs

Net: 10,56 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Bearing Retainer Pinion Seal, 23 spline input transmissions

Item No.:

PS515

Delivery time: ca. 4 weeks (DE - int. shipments may differ)

Lageraufnahme-Dichtung Für alle 1964-87 A833 4-Speed/Overdrive Getriebe Bearing retainer pinion seal For all 1964-1987 A833 4-speeds/overdrives.

12,57 €

incl. 19% VAT plus shipping costs

Net: 10,56 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Differential Bearing Cup 8 1/4_

BCA

Item No.:

BCA-LM102910

Delivery time: 5 - 7 Workdays (DE - int. shipments may differ)

Lager Kappe, Differenzial 8 1/4in. LM102949/10 Single-row Taper Roller Wheel bearing, bearing ables to carry radial and axial load in one direction simultaneously, this is a po...

Manufacturer according to GPSR
BCA

12,60 €

incl. 19% VAT plus shipping costs

Net: 10,59 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Fitting, Transmission Cooler Line Adaptor

Edelmann

Item No.:

EDD-842550NLA

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Brake Fitting, Adapter, Straight, Male Threads, Hose Barb, Brass, Natural, Each Brand: Edelmann Manufacturer's Part Number: 842550 Fitting Angle: Straight Fitting Attachment ...

Manufacturer according to GPSR
Edelmann

12,65 €

incl. 19% VAT plus shipping costs

Net: 10,63 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Clip Retainer For Lower Shift Tube Bearing

Item No.:

MOP-787

Delivery time: ca. 5 weeks (DE - int. shipments may differ)

Retainer Clip For Lower Shift Tube Bearing Dieser Clip hält das weiße Plastik-Lager der Lenksäule in dem Rohr im unteren Bereich fest.

12,74 €

incl. 19% VAT plus shipping costs

Net: 10,71 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Seal, Wheel rear inner

National Seal

Item No.:

NAT-4250

Delivery time: 5 - 7 Workdays (DE - int. shipments may differ)

DODGE B300 (1977 - 1980) DODGE B350 (1981 - 1994) DODGE B3500 (1995 - 1998) DODGE CB300 (1977 - 1980) DODGE D200 PICKUP (1977 - 1980) DODGE D250 PICKUP (1981 - 1...

Manufacturer according to GPSR
National Seal

12,94 €

incl. 19% VAT plus shipping costs

Net: 10,88 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Wheel Bearing front inner 1973-2004 most Mopar Cars, Vans, 2WD Trucks

Brower Bearing

Item No.:

BA17

Delivery time: 4 - 5 weeks (DE - int. shipments may differ)

Vorderes inneres Lager Front inner Bearing / Race for all 1973-74 models/für alle 1973 74er Modelle 35mm innen Cone Bore (In): 1.377 Inch Cone Bore (mm): 34.981mm C...

Manufacturer according to GPSR
Brower Bearing

12,99 €

incl. 19% VAT plus shipping costs

Net: 10,92 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Suspension/ Driveline Ratio Tag 3:55

Item No.:

MOP-FR55

Delivery time: ca. 5 weeks (DE - int. shipments may differ)

Suspension/ Driveline Ratio Tag 3:55

13,21 €

incl. 19% VAT plus shipping costs

Net: 11,10 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Seal, Power Steering Pump Shaft Seal

National Seal

Item No.:

N7013S

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

65-79 Saginaw Pump

Manufacturer according to GPSR
National Seal

13,49 €

incl. 19% VAT plus shipping costs

Net: 11,34 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Wheel Bearing front outer 1973-74 Truck 2WD (3300LB Axle)

Brower Bearing

Item No.:

BA16

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Vorderes Radlager Front Wheel Bearing All (5 & 8 Stud Hub) (3300 LB. Axle)

Manufacturer according to GPSR
Brower Bearing

13,59 €

incl. 19% VAT plus shipping costs

Net: 11,42 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Vent Valve universal, press in

ACDelco

Item No.:

ADO-19206216

Delivery time: 2 - 3 weeks (DE - int. shipments may differ)

Transmission Vent Tubes Part Type: Transmission Vent Tubes Product Line: ACDelco GM Genuine Parts Transmission Vent Tubes UPC: 707773948538 Vent Tube Material: Steel Vent Tube ...

Manufacturer according to GPSR
ACDelco

13,79 €

incl. 19% VAT plus shipping costs

Net: 11,59 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Axle Bearing 8 3/4in. 1955-64 Cup only!

Brower Bearing

Item No.:

B25821

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Lagerschale / old Style 8 3/4in. 1963-64 Detailed Description A full line of premium oil seals and bearings Premium bearing design matches OEM specifications Precision manufac...

Manufacturer according to GPSR
Brower Bearing

13,88 €

incl. 19% VAT plus shipping costs

Net: 11,66 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Transmission Mount B-Body 66-70, A-Body 66-72, C-Body 66-68 Rubber

DEA Products Inc.

Item No.:

DOS-A2272

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Getriebeaufhängung Originalversion aus Gummi 1966-70 B-body 1966-68 C-body 1966-71 A-Body (some 72) Wer etwas stabileres möchte kann ENS-5-1112G aus Polyurethane nehman

Manufacturer according to GPSR
DEA Products Inc.

13,90 €

incl. 19% VAT plus shipping costs

Net: 11,68 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Differential Bearing Cup 8 3/4_ late

Brower Bearing

Item No.:

BLM104912

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Difflagerschale 8 3/4in. late 50mm Innendurchmesser der Lager passt bei Auburn-Sperren

Manufacturer according to GPSR
Brower Bearing

13,93 €

incl. 19% VAT plus shipping costs

Net: 11,71 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Transmission Pan Filter A727 & A904 1962-65 2-hole

A+A Transmission

Item No.:

AAA-12776A

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

Getriebeölwannenfilter Transmission Filter standart Dacron Version (die version mit den 2 Löchern für die Ölansaugung) Nur der Getriebefilter enthalten. Kommt ohne Dichtung.

Manufacturer according to GPSR
A+A Transmission

13,98 €

incl. 19% VAT plus shipping costs

Net: 11,75 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Clutch Cam Bearing

Brower Bearing

Item No.:

BW585QNLA

Delivery time: 1 - 3 Workdays (DE - int. shipments may differ)

62-79 A-727

Manufacturer according to GPSR
Brower Bearing

14,07 €

incl. 19% VAT plus shipping costs

Net: 11,82 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Seal, Wheel Grease, front 1962-72

Timken

Item No.:

TMK-8121S

Delivery time: 2 - 3 weeks (DE - int. shipments may differ)

Seal, Wheel Grease, front 62-72 Disc Brakes (ab Werk) 1967-72 11_ Drum Brakes B&E-body 1966 all Drum Brakes 1963-72 C-body Disc & Drum (ohne Imperial) Part Description __Oil ...

Manufacturer according to GPSR
Timken

14,09 €

incl. 19% VAT plus shipping costs

Net: 11,84 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Tool, Clutch Alignment, 23-Spline

Centerforce

Item No.:

CTF-51023

Delivery time: 2 - 3 weeks (DE - int. shipments may differ)

Clutch Alignment Tool, 1 in. Diameter, 23-Spline, Plastic, Black, Each 23 Zähne Verzahnung der Getriebeeingangswelle __ Input Spline Quantity: 23 Input Shaft Diameter: 1.000 in...

Manufacturer according to GPSR
Centerforce

14,09 €

incl. 19% VAT plus shipping costs

Net: 11,84 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Seal, A904 Output Shaft, long Version

Transtar

Item No.:

TST-12925D

Delivery time: 5 - 7 Workdays (DE - int. shipments may differ)

***Bild entspricht nicht dem Original***

Manufacturer according to GPSR
Transtar

14,17 €

incl. 19% VAT plus shipping costs

Net: 11,91 €

Quantity: Each

Ich bin völlig damit einverstanden, nichts zu erhalten*.

Items 1 - 100 of 1174

Transmission, driveshaft and rear axle – sometimes those parts don´t get the attention they need! Although they are necessary for a good driving car!

Most Mopars we equipped with an automatic transmission, 62-78 all 3-Speeds. Smaller engines and lighter cars had a A904 installed, all others the A727. Therefore you will find the A904 (sometimes called TF6) mostly attached to /6 or SmallBlock V8´s.

The A727 (or TF8) was built with three different cases – for /6, Small Block and Big Block. That means, if your Mopar has a Big Block (distributor up front) with an automatic transmission, it will be an A727. You can identify the A904 and the A727 easily by the shape of the oil pan and its gasket.

On Manual transmissions you either had a 3_Speed or a 4-Speed transmission, which is known as A833.

On the driveshaft side of the topic, we want to let you know, that there were only 2 types of u-joints. The small Type 7260 (1 1/16”)and the big type 7290 (1 1/8”). Real muscle cars have the bigger 7290 from factory.

Rear axle are defined by the diameter of the crown wheels. Starting with 7 ¼” with the 9 bolts at the differential cover, following the 8 ¼” (10 bolts) and the mostly installed 8 ¾” rear axle. The 8 ¾” is easy to identify because of the welded differential cover. Bolted cover and tapered axle tubes tell the 9 ¼”. The biggest and heaviest version is the 9 ¾” axle, which is also known as DANA 60. 12 bolts on the differential cover and straight tubes will tell you.